Re: SAMSUNG HP-T5054 will not turn on,clicks when power is applied to it
Then you will need to check the FETs that it protects.
Then you will need to check the FETs that it protects.
-
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search. -
Re: SAMSUNG HP-T5054 will not turn on,clicks when power is applied to it
WHICH fets do i need to check,what is the best way to test themComment
-
Re: SAMSUNG HP-T5054 will not turn on,clicks when power is applied to it
Can you get a picture of the bottom area under the fuse that blew?Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: SAMSUNG HP-T5054 will not turn on,clicks when power is applied to it
Full Board
More Specific Area
Comment
-
Re: SAMSUNG HP-T5054 will not turn on,clicks when power is applied to it
I had 3 42" Samsung hp-t4254 and 1 hp-t4264 and 2 hp-t5054 and 2 hp-t5064 that I replaced the 6 1000uf, the 2 470uf, and the 2 2200uf caps and all 8 of them fired right up!
Hope this helps someone!Comment
Comment