LCD42761F possible t-con problem

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • joe.90
    New Member
    • Mar 2013
    • 6
    • wales
    #1

    LCD42761F possible t-con problem

    Problem with this tv is

    Backlight on, sound on but no picture

    The only thing i've notice is when turned on from standby a small blue light comes on T-con board then fades away after a few seconds

    Also cannot turn tv off on switch on side of tv
    Tags: None
    • selldoor
      Slow Learner
      • Dec 2010
      • 7870
      #2
      Re: LCD42761F possible t-con problem

      Originally posted by joe.90

      Also cannot turn tv off on switch on side of tv

      How about with the remote?

      Does the on screen menu display?
      Please upload pictures using attachment function when ask for help on the repair
      http://www.badcaps.net/forum/showthread.php?t=39740

        Comment

        • joe.90
          New Member
          • Mar 2013
          • 6
          • wales
          #3
          Re: LCD42761F possible t-con problem

          Works with remote,no menu
          Last edited by joe.90; 03-28-2013, 05:12 PM.

            Comment

            • selldoor
              Slow Learner
              • Dec 2010
              • 7870
              #4
              Re: LCD42761F possible t-con problem

              Why have you posted in the FAQ section AGAIN! It clearly says not to and your previous post had to be moved by a mod. Click on the red exclamation triangle and report yourself and ask someone to move it.

              We need Pictures.
              Please upload pictures using attachment function when ask for help on the repair
              http://www.badcaps.net/forum/showthread.php?t=39740

                Comment

                Previous template Next

                Related Topics

                Collapse
                • THXFX
                  samsung un43nu7100 BN94-13191C/BN41-02635A boot loop problem even with tcon jumper
                  by THXFX
                  Hi I need help with a Samsung un43nu7100 BN94-13191C/BN41-02635A with boot loop problem even with tcon jumper.
                  I've already try tape method and same happen, if I disconnect both flex from mainboard to panel tv boots normal even I hear Samsung sound.
                  When I solder jumper to make t-con work with or without panel or panel cables connected it still reboot or power cycling.
                  What I noticed is that there's no voltage in VHG, HAVDD, PANEL_3.3V, AVDD_17V or 12v near dc-dc chip.
                  I check capacitors and diodes and didn't find any short IN MAINBOARD.
                  Measured all power supply...
                  03-20-2024, 03:21 AM
                • theone111
                  Problem with LG Plasma 60PM6700 - Random power downs
                  by theone111
                  I have an LG Plasma TV 60PM6700 for the past ~12 years.

                  In the last ~3-4 months I have been having some issues.
                  1. Problem: It started with random picture disappearing (sound still worked).
                    Frequency: Happened about once a week.
                    Solution: Had to turn off TV wait a few seconds before turning it on again.
                  2. Problem: Then it got worse and the TV started to shut down and when turning on the no picture just sound.
                    Frequency: Happened about once a week.
                    Solution: Had to turn off TV wait about 10-20 seconds and turn it on again to solve.
                  3. Problem: TV shuts down
                  ...
                  1 Photo
                  07-22-2024, 10:36 AM
                • x_orange90_x
                  TCL 50S535 bad tcon or panel issue?
                  by x_orange90_x
                  Just bought this for 10 bucks yesterday hoping to fix it. The guy said water dropped inside from a dehumidifier hose and it started showing black and white vertical bars then went blank. When I got it home and turned it on it came on fine and displayed correctly but I was noticing faint vertical bars in the image. After a little bit I turned it off and back on and it was a black screen again. I opened it up to check for water damage and corrosion but didn't find anything of the sort. I cleaned the ribbons anyway and reconnected them but still got a blank screen. If I disconnect the right side...
                  03-29-2025, 11:02 PM
                • advant
                  Driving a Sharp TCON/panel with a universal main board
                  by advant
                  This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

                  I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
                  02-03-2020, 12:25 AM
                • Zeonalbasta
                  Thinkpad X1 Carbon "LMQ-1MB 12298-2 48.4LY26.021" VCC3M problem
                  by Zeonalbasta
                  i have a problem with thinkpad X1 carbon gen 2 "LMQ-1MB 12298-2 48.4LY26.021"
                  The laptop was turned off because the MOSFET was not transmitting voltage. After checking it turned out that the gate pin on the MOSFET was the problem, because it was producing an inappropriate voltage. and it was discovered that the problem was with the Think engine, so I decided to reprint each pin, and finally the mosfet could work properly. However, there is another problem, even though the voltage has been supplied to the laptop, it still won't turn on, there isn't even an LED indicator. After double...
                  09-13-2024, 01:17 PM
                • Loading...
                • No more items.
                Working...