Hpt5054 samsung hi guys happy st p day got ve volt problems got 14v should be 97v

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • davewilson61
    Member
    • Jan 2013
    • 110
    • usa

    #1

    Hpt5054 samsung hi guys happy st p day got ve volt problems got 14v should be 97v

    HI

    got all voltages...tv on no picture but stays on..

    disconected the x y boards no change in VE 14.4V SHOULD BE 97V

    when tv is off VE is 0V.... tv on 14v with no load always 14v

    could icx805 be at cause in line to VE output? cn809 and cn810 out

    main board is turning on VE

    THANKS GUYS
  • davewilson61
    Member
    • Jan 2013
    • 110
    • usa

    #2
    Re: Hpt5054 samsung hi guys happy st p day got ve volt problems got 14v should be 97v

    Originally posted by davewilson61
    HI

    got all voltages...tv on no picture but stays on..

    disconected the x y boards no change in VE 14.4V SHOULD BE 97V

    when tv is off VE is 0V.... tv on 14v with no load always 14v

    could icx805 be at cause in line to VE output? cn809 and cn810 out

    main board is turning on VE

    THANKS GUYS
    would VE low affect the picture not on?

    Comment

    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK

      #3
      Re: Hpt5054 samsung hi guys happy st p day got ve volt problems got 14v should be 97v

      Low VE would cause a very poor picture usually purple tinted or dim.
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

      Comment

      • davewilson61
        Member
        • Jan 2013
        • 110
        • usa

        #4
        Re: Hpt5054 samsung hi guys happy st p day got ve volt problems got 14v should be 97v

        have no picture though

        Comment

        • tom66
          EVs Rule
          • Apr 2011
          • 32560
          • UK

          #5
          Re: Hpt5054 samsung hi guys happy st p day got ve volt problems got 14v should be 97v

          I would expect some picture still with low VE but I am not 100% on this particular model. Check in a dark room -- does the screen glow slightly?
          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

          Comment

          • davewilson61
            Member
            • Jan 2013
            • 110
            • usa

            #6
            Re: Hpt5054 samsung hi guys happy st p day got ve volt problems got 14v should be 97v

            good point will check

            Comment

            Related Topics

            Collapse

            • Document Archive
              ASUS ROG G512LI-HAPPY Notebook Strix G15 Specification for Upgrade or Repair
              by Document Archive
              This specification for the ASUS ROG G512LI-HAPPY Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the G512LI-HAPPY boardview and G512LI-HAPPY schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download for...
              09-06-2024, 11:40 PM
            • jean luc ferre
              laptop hp g72 b52sf screen problems
              by jean luc ferre
              Hello,
              on this laptop hp g72 b52sf i have screen problems as you can see with the photo joined in attachments.
              the used graphic card is "intel hd graphics" and the id of the integrated screen is : "monitor/SEC3354".
              i verified the driver of the péripherals and they are ok. i verified the definition and settings of the graphic card and of the screen : definition 1600x900 and refreshment frequency :60hz. (they are the sames for the graphic card and the screen).
              i don't understand the reasons of the white stripe at the bottom of the screen below the task...
              06-07-2025, 03:27 PM
            • gabri2211
              external hd Seagate, broken down the +12 volt and USB 3.0 SATA board
              by gabri2211
              Hi to all 😎
              I'm looking for any useful information to repair this interface (I have attached the image).
              On this board I read E3215-1215A_4D.
              This is the small plate inside the HD enclosure that allows to connect a 12 volt power supply, interface the disk with a USB 3.0 socket and is connected to the HD with the SATA connector.

              If any of you have found a burnt or short-circuited component in a circuit like mine​, if you have useful diagrams for the repair, or even better a description for the tests at the test points, I would be very grateful.
              in particular...
              11-12-2024, 08:08 PM
            • Hondaman
              USB problems?
              by Hondaman
              Recently I discovered my SSD died (OCZ/Toshiba 240 GB). It was in a USB enclosure, attached to the Linksys WRT-AC1200 router. Since then I removed the USB enclosure and attached it to my Win7 PC (AMD 8150 CPU, 970 chipset, 64 GB RAM). I also gathered one or two other USB enclosures to figure out what is going on.

              (I suspect that I lost quite a few MP3 and FLAC files I recently ripped from my audio CDs, I think I lost very little un-replaceable stuff.)

              I think it is IMPOSSIBLE for Win7 to have any problems with a USB enclosure as long as Win7 knows how to speak to the...
              08-12-2024, 03:26 PM
            • clabr
              Lenovo 11e problems (any sata hdds are not recognized, sleep battery drain)
              by clabr
              Need help to solve some problems with this laptop.

              After working in bed with it one night and heating up too much (probably the cause of this problems) the sata HDD OS windows froze
              After restart the original Sata HDD was not recognized anymore (but works fine in other laptops or PCs)

              Tried connecting other good Sata 2.5 HDDs but not one is working in this laptop anymore (not the original nor others)

              Before this had happened I observed some other problems:
              When I tried replacing original mecanical HDD with a SSD HDD could not get them...
              12-02-2021, 08:09 AM
            • Loading...
            • No more items.
            Working...