Announcement

Collapse
No announcement yet.

Vizio VM60P no picture has sound

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Vizio VM60P no picture has sound

    Hello, I have a Vizio VM60P HDTV10A that i'm trying to fix. I was watching the TV and heard a loud pop/snap and the picture when out but the sound was still on. TV is responsive to the remote control(volume+-,channel change). I checked all the bus type fuses in OHMs and after showing up minimal reading go to 0 in 1-2 seconds.
    Thank you in advance for all help and god bless.
    Tags: None
    #2
    Re: Vizio VM60P no picture has sound

    Can someone help me figure out what part need replacing thanks

    Comment

      #3
      Re: Vizio VM60P no picture has sound

      From the sound of this so far, it sounds like something's broke.
      lol

      It could be caps, inverters, etc... it's hard to know at this point. Post pictures of your boards and the set's overall layout and it should give us come clues of where to go next. The good thing is that if it mad a popping sound, theres a good chance that a visual will catch the problem.
      The strong-minded rise to the challenge of their goals,the weak-minded BECOME HATERS

      Comment

        #4
        Re: Vizio VM60P no picture has sound

        Thanks for the reply, I will post pics ASAP. Form the research I done so far people say its a common problem fixed by replacing the Y sus board. I also read that you shouldn't replace the y with out the X sus as well. Sucks paying $2500 for a tv to have it break in 6 years. I searched for bulging caps but didnt find any but will see from the photos. Looking forward to the accomplishment of fixing it.

        Comment

          #5
          Re: Vizio VM60P no picture has sound

          Originally posted by bigcim View Post
          Hello, I have a Vizio VM60P HDTV10A that i'm trying to fix. I was watching the TV and heard a loud pop/snap and the picture when out but the sound was still on. TV is responsive to the remote control(volume+-,channel change). I checked all the bus type fuses in OHMs and after showing up minimal reading go to 0 in 1-2 seconds.
          Thank you in advance for all help and god bless.
          Wow not much help you have been getting on this...People seem to not want to help the newmbs much...we all start somewhere no?
          This tv is a plasma. A common issue with these sets are Ysus or Zsus boards.
          Maybe even the buffer boards went out also. Start by measuring standby voltages,check fuses,look for burned components and go from there.

          Comment

          Previous template Next
          Working...
          X