Announcement

Collapse
No announcement yet.

Bush IDLCD26TV16HD - Dim flickering backlight - Fixed

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Bush IDLCD26TV16HD - Dim flickering backlight - Fixed

    Just fixed this one with a friend. Two 10uF 400~450V caps on PSU replaced. Had been done before -- only one replaced with a 400V Samwha RD. This cap smoked upon application of power. It is important to make both caps 450V or higher! Replaced both with Rubycon BXC (10uF 450V) and it works great.
    Last edited by tom66; 02-15-2013, 02:33 PM.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    #2
    Re: Bush IDLCD26TV16HD - Dim flickering backlight - Fixed

    nice easy fix tom did this one have the built in dvd like the one i was trying to fix? send me some links of some easy fix ones to buy haha.

    Comment


      #3
      Re: Bush IDLCD26TV16HD - Dim flickering backlight - Fixed

      No DVD built in.
      Look on Gumtree etc. I'm not going to find them for you!
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

      Comment


        #4
        Re: Bush IDLCD26TV16HD - Dim flickering backlight - Fixed

        i was only joking hahahah. yes i do daily dont worry i dont mind traveling either as long as there the right price do you find 26in lcd sell ok i usually only go 32in and higher.

        Comment


          #5
          Re: Bush IDLCD26TV16HD - Dim flickering backlight - Fixed

          I can sell 26" easily to students about £80~£90 each. Only paid £25 for it plus £1.50 in caps.
          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

          Comment


            #6
            Re: Bush IDLCD26TV16HD - Dim flickering backlight - Fixed

            i forgot you had the students to sell to yes ideal size for the dorms etc.good mark up on that one and you work on the same as me £1.00 a inch when buying unless i have to travel more.

            Comment


              #7
              Re: Bush IDLCD26TV16HD - Dim flickering backlight - Fixed

              I will pay more for really good TVs like the 46" Panasonic I have now.
              Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
              For service manual, schematic, boardview (board view), datasheet, cad - use our search.

              Comment


                #8
                Re: Bush IDLCD26TV16HD - Dim flickering backlight - Fixed

                I am still looking for one dont worry but will probs need your help repairing it please.I am trying to sort some pc stuff out today to build a media pc up so doing that at the minute as should have all the parts in the shed to do it although i might need a new graphics card with hdmi on.

                Comment


                  #9
                  Re: Bush IDLCD26TV16HD - Dim flickering backlight - Fixed

                  I will offer what help I can.

                  I am on the look out for another to fit in the basement . I would also settle for a NEC, Pioneer or LG plasma.
                  Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                  For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                  Comment


                    #10
                    Re: Bush IDLCD26TV16HD - Dim flickering backlight - Fixed

                    what size screen you looking for tom what distance would you be willing to travel? between me job searching etc i also visit a lot of free add sites and do see some some sets on offer really cheap but i don't always have the money myself so i can send you the links/adds if you want as you may not have time to source them with you university course work.

                    Comment


                      #11
                      Re: Bush IDLCD26TV16HD - Dim flickering backlight - Fixed

                      Originally posted by vinceroger69 View Post
                      what size screen you looking for tom what distance would you be willing to travel? between me job searching etc i also visit a lot of free add sites and do see some some sets on offer really cheap but i don't always have the money myself so i can send you the links/adds if you want as you may not have time to source them with you university course work.
                      I'm after a 50~61" plasma for the home cinema. I know NEC made a very nice 61" 720p one that few are brave enough to touch as it has a lot of issues with the PSU. Won't stop me though. 55" Hitachis are nice, and almost full HD (1280x1080 ALIS.) Not gonna touch any LG using IPMs but their newer plasmas are OK. Not fantastic, but "OK".

                      I have quite a bit of free time. I will be challenged around exam period, but that is it.
                      Last edited by tom66; 02-16-2013, 06:01 AM.
                      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                      Comment


                        #12
                        Re: Bush IDLCD26TV16HD - Dim flickering backlight - Fixed

                        Was this the ipos 150?

                        May help with peoples search to include it .
                        Do NOT touch heatsinks when testing for voltages as they may be LIVE!

                        Comment


                          #13
                          Re: Bush IDLCD26TV16HD - Dim flickering backlight - Fixed

                          Yes. IPOS 150. IPOS = "Integrated Piece of S**t"?
                          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                          Comment

                          Working...
                          X