Panasonic TH-58PZ800U

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Tony Wish
    New Member
    • Feb 2013
    • 1
    • USA
    #1

    Panasonic TH-58PZ800U

    Have a Panasonic Plasma that made a loud bang and picture disappeared. I have a two blink error code. I read this as the P-Board and replaced it. Same problem. In un-plugging the TV and turning it on the cooloing fans briefly kick in and then goes south again with two blink error code , any suggestions? I have 6 grandkids coming next week and it could be a disaster without this working.

    Tony
    Tags: None
    • DavidOH
      Senior Member
      • May 2012
      • 105
      • USA
      #2
      Re: Panasonic TH-58PZ800U

      Do a search for Panasonic 2 blink. You'll find lots threads about the 2 blink code.

        Comment

        • oscarmoz
          New Member
          • Jan 2013
          • 1
          • canada
          #3
          Re: Panasonic TH-58PZ800U

          13blinking

            Comment

            • tom66
              EVs Rule
              • Apr 2011
              • 32560
              • UK
              #4
              Re: Panasonic TH-58PZ800U

              Fan error, I think, check all the fans are clean.
              Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
              For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                Comment

                Previous template Next

                Related Topics

                Collapse
                • cloo
                  Panasonic ZT60 plasma tv with strange behavior and 8 blink code
                  by cloo
                  I recently got my hands on a 60" Panasonic P60ZT60 plasma tv (european model) that has some strange issues along with an 8 blink code.
                  It know this tv is getting old but it was once considered one of the best plasmas ever made, and i think it is still holds on to that even by todays standards.


                  So, long story short. When i first got the tv it had a very bright washed out picture with very raised blacks in all picture modes and i couldn't find the cause in the picture setting menus.
                  After doing a factory reset this problem was gone and the picture was back to...
                  01-06-2025, 06:02 AM
                • Vebririon
                  panasonic TX-P50V10E 6 blink led problem
                  by Vebririon
                  Hi everyone,

                  I'm new here and trying to repair my Panasonic TX-P50V10E plasma TV, which is currently showing the 6 red blink error code.

                  Just for context: I'm used to building PCs and installing modchips in old consoles, but this is my first time trying to fix a TV. I'm French, and while my English is okay, I'm using ChatGPT to help translate and clarify my messages as much as possible — so please forgive any odd phrasing.

                  I'm also not very experienced with using a multimeter, but I'm very motivated and ready to follow instructions carefully and report...
                  05-17-2025, 10:16 AM
                • nervx
                  Panasonic TH-42PZ800 8-blink error mystery
                  by nervx
                  Years ago my tv gave a 7 blink code which turned into 8 during diagnosis. I had ordered a replacement ss board but somehow the tv started working again and i never used the board. Now a week ago my tv flickered and shut off at random and gave the 8 blink error code. The same issue it had all those years ago. The only difference this time is that over the last few months there has been some purple and green tinge that comes and goes in more solid colors such as white.

                  Anyway i checked all the screws and replaced the ss board with a known good one and still got 8 blinks. I saw a...
                  04-08-2022, 05:19 AM
                • SentraDude
                  (Another) 7 BLINK TC-P60VT60 Panasonic - NEWBIE
                  by SentraDude
                  Greetings from SoCal I am new to this forum but not new to forum world. I come from Automotive end of side which is my main passion in life. Give the automotive nature, I love fixing and restoring things and I have in the past fixed many simple electronics, soldering, etc.. but this is a bit more involved so I found this forum, and I am very glad I did.

                  I picked up a Panasonic TC-P60VT60 with the 7 BLINK error.
                  Upon removing the back plate I found spider webs, dead spiders, and an amazing amount of dust. I did my best to clean the surface of the boards with a portable vacuum...
                  04-04-2023, 04:24 PM
                • rmacintosh
                  Panasonic Plasma repair - TH-P60GT50 - Dead, 3 blink code
                  by rmacintosh
                  I aquired this Panasonic 60" plasma around the time my first child was born. It was meant to be a project tv, hoping to fix it chipping away at the repair in my free time. Well that was 2 years ago and i'm really just getting around to making a sincere effort to see if I can ressurect this beast.



                  The symptoms of the tv ar as follows:
                  • Plug AC in to back of TV
                  • After about 2 seconds the relay on the P-sub board will click on and then a fraction of a second later it clicks back off
                  • The 3 blink code is given by the power LED
                  • If the TV is unplugged and then
                  ...
                  03-14-2020, 12:24 AM
                • Loading...
                • No more items.
                Working...