JVC Plasma PD-42X776

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • bobbyd40
    Senior Member
    • Dec 2012
    • 116
    • usa
    #1

    JVC Plasma PD-42X776

    Horizontal bars not solid going across screen .Pulled all connectors and reseated found large cap on board on right bulged and leaking.Replaced cap from Digi key no change. Tried re seating all connectors again any ideas?

    Pic is what display looked like before replacing cap and after with the exception of a couple of black bars horizontal across screen they are gone now.
    Attached Files
    Tags: None
    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK
      #2
      Re: JVC Plasma PD-42X776

      Y-buffer fault. Replace the Y-buffer.
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • bobbyd40
          Senior Member
          • Dec 2012
          • 116
          • usa
          #3
          Re: JVC Plasma PD-42X776

          Thanks Tom that's what i thought from reading your post on plasma sets but wanted to confirm.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • x_orange90_x
              Samsung UN46C8000XFXZA vertical bars/horizontal lines
              by x_orange90_x
              I posted about this previously but didn't get any response, and I have some troubleshooted a bit so I have more info.

              The screen is full of horizontal "gaps" or lines that distort the picture badly, and after about 10 seconds of powering it on the screen starts to fill with red vertical bars that take on the horizontal pattern. After the screen filled with the red bars, they instantly vanished and then slowly started to reappear. I initially thought it was tab bonding failure, but after getting down to them and pressing each one I find zero change in the picture. I went...
              09-04-2023, 12:09 PM
            • CapLeaker
              LG 65UQ70 horizontal bars jumping
              by CapLeaker
              So I bought this LG 65UQ70 today at Walliworld. Put the wall mount on, set it up, worked for 30 mins and then I get these jumping horizontal bars. Let the TV do updates and let it cool down for 5 mins. Worked perfect for 2 mins. As soon the TV is warm I get the jumping vertical bars again.

              Keep the other TCL thread in mind. Now I am questioning are all COVID 2022 / 23 TV’s bad or what? That’s two 65” TV’s one from Amazon and this one from Walmart. What are the chances on that?

              I guess this one goes back either later today or tomorrow morning, unless...
              08-13-2024, 09:41 AM
            • Akira81
              LG 55LF652V-ZA flashing led bars despite their replacement
              by Akira81
              Hello everyone,

              I have this 55" LG 55LF652V-ZA smart TV which suddenly started flashing intermittently every 2 seconds with the backlight.



              If I aimed the light bulb of my cell phone I could see the underlying image even in those fractions of time when the LEDs were off and the audio instead came out continuously.

              Armed with a lot of space and patience, I decided to open the TV, immediately noticing that a LED had flamed out and also burned a portion of that reflective white panel behind the transparent LED diffusers.
              ...
              04-14-2023, 11:50 AM
            • Wf789
              Pioneer PDP-V402 - Black Horizontal Lines
              by Wf789
              Hi, I'm new around here and hoping that there may still be some people on here that are knowledgable about plasma display repair, as some of the old badcaps forum posts have been pretty useful to me so far.

              For any regular plasma TV I probably wouldn't bother to go through this effort, but I have a pro-grade Pioneer plasma which I really want to use and it would be a shame to throw it out since there's not many of them still around these days. The plasma has the typical black horizontal lines that seem plague plasma displays. I've counted 3 lines on top of the screen and 4 at the...
              04-10-2022, 06:31 PM
            • Ihandyrepair
              Samsung QN70Q6DTA Ghost or horizontal lines after tape fix horizontal line
              by Ihandyrepair
              Hi guys

              I just started fixing 4k TV few months ago. so I am still learning a lot
              I got this tv from friend complaint is ghosting or horizontal lines on image.

              never saw the original symptom but I took the tv back home. the funny part is that after bringing to home, the tv worked fine no issue for 3 weeks.
              then it started to show the ghosting white image.
              I started using the tape method, but this tv does not have a T con board and it has only 1 ribbon cable from main board to the tv panel.
              it has 3 thin small boards at the bottom of the...
              12-05-2022, 04:18 PM
            • Loading...
            • No more items.
            Working...