Hello everyone,
I have this 55" LG 55LF652V-ZA smart TV which suddenly started flashing intermittently every 2 seconds with the backlight.
If I aimed the light bulb of my cell phone I could see the underlying image even in those fractions of time when the LEDs were off and the audio instead came out continuously.
Armed with a lot of space and patience, I decided to open the TV, immediately noticing that a LED had flamed out and also burned a portion of that reflective white panel behind the transparent LED diffusers.
...
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
LG 55LF652V-ZA flashing led bars despite their replacement
-
[SOLVED] Corsair vs650 random power off / reboot
after some time I can confirm that by replacing the ic with a WELTREND WT7525Y DIP-14P I solved the random reboot problems on this power supply.
Let's hope this one I bought will last over time.
Thank you all for your invaluable help
-
Re: Corsair vs650 random power off / reboot
The only capacitors that I see whit CapXon brand seem to be these 2 ....
[url]http://imgur.com/a/zhwCb9u[/url]
did you mean that I only have to replace these 2 with equivalents but of the rubycons brand ????
here's a pictire of the bottom of the vs650 board:
[url]http://imgur.com/a/LUCEmmA[/url]
Thank you guysRe: Corsair vs650 random power off /... brand seem to...Last edited by Akira81; 05-06-2020, 11:02 AM.
Leave a comment:
-
Re: Corsair vs650 random power off / reboot
I'm not very expert ... the results of this tester can be useful to the verification you asked me?
[url]https://imgur.com/a/EZWunk1[/url]
Does that 5.1 value that I see on the screen have to be monitored over time or can it be taken for good now?Re: Corsair vs650 random power off /... /> Does that...
Leave a comment:
-
Corsair vs650 random power off / reboot
I have a problem with a power supply vs 650 (of those first version with the orange label) this to be clear:
[url]https://www.corsair.com/it/it/Categorie/Prodotti/Alimentatori/vs-series-config/p/CP-9020098-EU[/url]
the power supply turns on but randomly turns off the pc
immediately after you can turn on the PC and cross your fingers until the next shutdown / reboot.
The 12cm fan runs well
there are no swollen condensers, burns, brown areas
some photos of the components inside:
[url]https://www.nexthardware.com/repository/focus/175/immagini/Corsair_PSU_vs_n.d_-61-.JPG[/url]...
-
Acer e1-510 power on black screen
hi
i have a problema with a acer aspire e1-510 model n z5we3.
if i press power button blue ligth comes on but nothing appear on the monitor,if i connect battery orange led comes on.
I have tried to take out ram and no beeps come out from the case, i have tried to take battery out and power cord out and press for 60sec the power button but nothing change.
the only things that i can do is pressing esc+fn button while powering on and the hd led come on.
So i have decided to find the .fd bios to reflash it but acer's support site dosen't provide it....
-
Re: acer 5742z dead in my hand
PL27 and PL28 are grounded
with power cord in pl28 3.5v on both side and pl27 5v on both side
during the measure i have a very hot temperature from u16
what happened???...
Leave a comment:
-
Re: acer 5742z dead in my hand
i'm going blind to find it where is the pl47!?!?!?!
i have a new70 la5892p rev 1.0
Leave a comment:
-
Re: acer 5742z dead in my hand
I m noob i cant understand what means ec bios and where i can measure 3.3 and 5v ...
Leave a comment:
-
Re: acer 5742z dead in my hand
I have disassembly the motherboard and with battery in and power cord in i see 3,28v on pin96 of the u16
0v whitout power cord. And battery in
3,28v without battery and power cord in
Are there some testpoint to get this motherboard on without power button/ flat?
Leave a comment:
-
acer 5742z dead in my hand
hello
this is my first post and my enlish is not so good .. so be patience
i have an acer 5742z with a bad panel, i have found a 15.6 led to replace it and i have try it before remount the case and the cover lid... evrithing was ok so i was happy and i have turned off windows and i ve been ready to reassemble.
When i start to reasseble all, i forgot to remove the battery and when i have attacched the ribbon cable to my panel i have see a little lightning near herenothing of too bad i think....
after this (when i put in it power...
No activity results to display
Show More
Leave a comment: