Is it time for a reference library?
Just a suggestion: We have budm's "LCD and Monitor guides", I know Tom66 submitted a very useful and informative article on Plasma TV theory of operation, which would make a great sticky. I have seen a lot of requests that my "Factory Resets" thread be sticky. I know well managed forum tries to prevent a huge list of "stickies" at the beginning. I would like to suggest creating a "Reference Library" sticky for these, and others that may come up. It should probably be limited to mods and admins for adding/submitting content. It could just be a growing list of links to really good general training and reference information pertaining to TV repairs.
-
-
Re: Is it time for a reference library?
I was thinking along the same lines - I save a lot in my favourites and members have links in their signatures. Perhaps repost this in the Site Suggestions forum then most of the mods will see it.
Stickies on here dont seem to stick as well as on other sites - i can never seem to find them unless I have saved the link.Please upload pictures using attachment function when ask for help on the repair
http://www.badcaps.net/forum/showthread.php?t=39740 -
Re: Is it time for a reference library?
I have a whole collection of successful repair notes that I'd be willing to share. Right now they're on the service manuals site: http://www.tgohome.com/ServiceManuals/Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Is it time for a reference library?
I have now posted this in the suggestions forum. Thanks for the suggestion!
Comment
-
Problem
This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached.... -
Hi guys,
I post my problem here because I think it could be a capacitor related issue (Asus support on this particular subject is non-existing).
So the computer is a Zephyrus-S17-GX735LXS-26T and the strange behavior is seen.
On cold start most of the time the internal screen is detected and a picture it works fine until shutdown, sleep or deep sleep.
Then the screen won't work for a long period of time.
If I wait 1 or 2 hours it work again most of the time.
When it doesn't work the batterie indicator blink 3 times white stop and the same schematic is repeated... -
I have a cheap action camera with an annoying trait, every time I change batteries the date & time gets reset and I have to set it again.
To solve this problem I want to add a small internal battery inside it which will keep supplying power to the camera for a while while I change batteries so the date & time is retained.
I have opened the camera and I think there is enough room to add something inside to accomplish this:
The camera is powered by a 3.7V nominal single cell lithium ion battery.
So I need to connect another battery in... -
Hello,
I just came here to see if someone has had the same problem I have, and if he or she solved It, to know how to do It.
I have made a quick search for my laptop but I have not seen anything similar.
I have an old laptop, an HP Pavilion dm4-1065dx which takes a lot of time to be ready to start if the laptop has been unplugged for a while. It has no battery. The battery failed long time ago. It needs to be plugged to work. But as I said, It can take a lot of time until the charging led gets on, and I can switch on the laptop. I am using an external monitor... -
ABOUT ME INTRODUCTION FILE
2024 BEV, BIH, SARAJEVO START PROJECT: ELECTRIC VEHICLE TOYOTA 4 RUNNER CONVERSION http://www.bev.ba/TOYOTA4RUNNER/index.html
2023 BEV, BIH, SARAJEVO START PROJECT: SECRETS AND MANUFACTURING PLANS (AS MY REPLICA) OF THE LIBERTY ENGINE 2.0.
2022 BEV, PROJECT ?
2021 BEV, PROJECT ?
2020 BEV,BiH, Sarajevo: PROJECT IS: HOW TO SWITCH OFF PERMANENT MAGNET FIELD and HOW TO SWITCH ON PERMANENT MAGNET FIELD?
2019 BEV, Croatia, Ston:, Broce: PROJECT - PROJEKT ELEKTRIČNI GLISER http://www.bev.ba/ELEKTRICNIVANBRODSKIMOTOR/indexHR.htm...12-28-2023, 02:09 PM
Comment