32PFL3403D/27 no image, led on sound on

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • rgmaggi
    New Member
    • Jan 2013
    • 1
    • USA

    #1

    32PFL3403D/27 no image, led on sound on

    Hi all and thanks for reading. I have a Philips 32PFL3403D/27 that seems not to power on, I mean, no display image at all but the green led is on, as well as the sound. I check the power board and the inverter (I am 50yo so my eyes are not the same) but I did not see any cap or diode looking wrong. My question is if I may replace either the power board and/or the inverter. I tried to look in the threads how to check which board may be wrong but there were so many that I got lost. Any help will be very welcome
    Ricardo
  • martyparish
    Badcaps Veteran
    • Dec 2012
    • 313
    • United States

    #2
    Re: 32PFL3403D/27 no image, led on sound on

    Try looking closely at the screen with a flashlight while tv is on and has an input(cable,dvd, etc). If you can make out a picture, then it would be back light problem(inverter, PSU, bad bulb).

    Keep in mind, I am fairly new to tv repair but this should be your next step I believe. Also, should check the output voltages from the PSU.

    Comment

    Related Topics

    Collapse

    • ChaosLegionnaire
      what i went through dealing with my mobo with dead onboard sound!
      by ChaosLegionnaire
      so i took out one of my spare gigabyte ep35-ds3r mobos from storage for use to do some cpu, ram and video card testing of stuff i bought from ebay and got for free from momaka. he bought 50 e8400 cpus for cheap from ebay some years ago and i decided to help him relieve him of some of his supply since he had waaaay too many!! what did we say about hoarding too much stuff and depriving others of them?! *cough* socialism *cough* lol!

      i had to blow some dust off the board and heatsinks with the datavac as i didnt clean it up before putting it in storage. after finishing...
      09-13-2022, 09:02 AM
    • domix
      Sony KD - 65XF9005 - No image, sound OK
      by domix
      Hello,
      at tv KD - 65XF9005 i have a problem.
      Afrer a coupe of minutes (10-30) i got black screen, no image. But i have sound.

      is this a common problem for this tv?

      i attached pictures of inside. Supply board looks okey, no blowed caps....
      07-21-2025, 06:37 AM
    • Kartowl
      philips 47pfl6158k/12 image faded away, sound still coming from TV
      by Kartowl
      Hi, my TV image started showing those lines and the image faded away, but sound is still coming from it, what could be the cause and is it fixable? I thought it could be the tcon board but I red on the internet that it could be a failing panel

      ...
      04-23-2024, 12:57 AM
    • wolf1976
      samsung ue40d6100 has no backlight no sound and image
      by wolf1976
      hi to all
      on the above model of samsung i have the faults i have told already on the title
      iI have standby i can from remote control open and close the tv and it seems reacts the tv when i press someone button from remote control but and with the help of a torch i cannot see anything image on the tv and no sound
      any idea from someone what can i measure so i can find the problem ?
      the power supply is the bn44-00482a i cannot find the service manual so i can test if the leds are ok and maby these are the cause of my problem
      11-17-2024, 01:02 PM
    • howardc64
      LG 43UK6500AUA no LCD image, backlight and sound okay
      by howardc64
      Similar to another LG UK series here

      https://www.badcaps.net/forum/showthread.php?t=93943

      Have backlight and sound. no LCD image.
      • main board has integrated T-Con
      • main board T-Con has LCD DCDC/PMIC RT6950GQW QFN68 package. Richtek chip. Can't find datasheet. Chip generates VADD (10.44V), VGH (~28V), VGL (~-14.5V)
      • RT6950 pin 18-19 (clockwise) appeared to be bridged. Unlikely from my probing, looks like ball squeezage so it probably got hot
      • Cleaned up bridging. Pin 17 is VGL (-14V) Pin 20 is VGH (28V). Pin 18 (I think 19 too) jumps between VGL and VGH voltage
      ...
      03-12-2023, 01:04 PM
    • Loading...
    • No more items.
    Working...