Need information about CCFL's

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • Jedi
    New Member
    • Oct 2013
    • 4
    • USA
    #21
    Re: Need information about CCFL's

    Any suggestions on this? I don't mind to buy a new inverter board if it will fix it. I was just hoping someone could give me come kind of confirmation that it would.

      Comment

      • johnboy1313
        Badcaps Legend
        • Nov 2012
        • 1959
        • USA
        #22
        Re: Need information about CCFL's

        Have you tested the transformers on the slave inverter?

          Comment

          Previous 1 2 template Next

          Related Topics

          Collapse
          • Delicieuxz
            I replaced all electrolytics in subwoofer, still get a hum in speakers - audio clip
            by Delicieuxz
            I get a faint, low hum through my PC speakers, which connect to the subwoofer in a 2.1 speaker system. The hum drives me crazy and makes me stressed. When I turn off the subwoofer, everything is quiet and I start to relax, lol.

            Here's an audio clip of the sound coming from my speakers:

            https://vocaroo.com/16HaryHwTx78

            I recorded with my phone's mic right next to the speaker, and the mic picked up a lot of speaker noise over top of the hum. But I don't hear that noise in the room, I just hear the lower-pitched hum that's buried beneath all the other...
            11-15-2023, 09:50 PM
          • ChaosLegionnaire
            correct way to connect bare speaker wires into spring clip terminals?
            by ChaosLegionnaire
            i recently bought a logitech z607 surround system. however, its giving me grief. when i first connected it, it only had sound coming from the front right speaker. after a great deal of fiddling and reseating the speaker wires into the spring clip terminals, i finally had sound coming from all 5 satellite speakers.

            however, the sound still gets cut off intermittently if i move the speakers, subwoofer or move/touch the speaker wires on the back of the subwoofer. so i wanna ask what is the right way to connect bare speaker wires into spring clip terminals?

            i googled...
            10-27-2022, 06:19 AM
          • andy smith
            interm m1000 clip lights
            by andy smith
            Hi all my name is andy
            I have a interm m1000 amp that has both clip lights on. I have checked DC on speaker outputs and is 0 volts , can anyone offer any advice

            thanks andy
            01-23-2025, 02:22 PM
          • Fritter
            Bulbs to avoid in current limiter
            by Fritter
            Hi all,
            Just putting my first current limiter together (uk). Apart from led's, are there any bulbs that will not function as needed? Any advice much appreciated.
            10-31-2023, 11:24 AM
          • Chrille
            Phonic MAX 860 clip / no output
            by Chrille
            Hi,
            Does anyone have experience of this amp? I've spent ours trying to repair this amp!
            I have several Phonic MAX 860 amplifiers and they ALL have the same problem, more or less!
            This is the thing:
            If I haven't been using the amplifier for a while it goes in to a "no output/clip mode".

            I'll try to explain:
            When I power on the amplifier everything seems to be Ok. I connect a 8 ohm dummy load to the outputs. All still Ok.
            I connect inputs to a signal source and play some music on low volume and everything is still Ok.
            But...
            02-28-2021, 01:26 PM
          • Loading...
          • No more items.
          Working...