Panasonic TC-P50G15 6 Blinks

[argonrepublic]

*I have 6 Blinks on LED
What is the next best step?

[drpj23]

Re: Panasonic TC-P50G15 6 Blinks

Make sure the ribbons/connectors are seated properly between the SC, A and C boards.

Can you check/report the voltage on pin 21 on SC20 before shutdown occurs?

Lastly, do you have a C10 connector on the C1 board?

[tom66]

Re: Panasonic TC-P50G15 6 Blinks

I had a P50G10B with 6 blink code, I never solved it, though I suspect the SC was the fault.

[drpj23]

Re: Panasonic TC-P50G15 6 Blinks

Ya, that's probably what it is going to be.

[Mt.Man]

Re: Panasonic TC-P50G15 6 Blinks

6 blink is a SC, SU, or SD error. If your SU and SD boards are not shorted, then most likely a bad SC board.

[tom66]

Re: Panasonic TC-P50G15 6 Blinks

In rare cases, a failed SS can cause the SC to throw an error, too.