argonrepublic
New Member
Last Activity: 06-24-2018, 04:16 PM
Joined: 10-22-2012
Location: Brantford Ontario
-
Toshiba 40E210U Dead
I brought this TV home knowing it was defective and nothing more. I plugged it in and it fired up and ran perfectly for about 15 minutes. Since then it will not turn on. At first the Power light was coming on for 5 seconds and going out. Now after 20 tries over 24 hour period, no power light but the Power supply is turning on ( 12Volts, 24 Volts ) Backlights are not illuminating from what I can see and no picture or sound. -
Samsung UN46C5000QF Backlight
I have no picture. Started it with mainboard disconnected. Backlight should light but no backlight.
I need a schematic and some tips for repairing the back light circuit. -
HDMI properties
I have two 24" open frame ( commercial display ) monitors.
I purchased them with Brightsign media players. They both function identically when connected to the media units. For some bizarre reason, only one of them will work from HDMI from blu ray, TV box, computer etc. I have tried every possible combination. Both are the same model. Manufacture date about 4 months apart.
I would like to use them in a dual display arrangement.
Any suggestions? -
Toshiba 55G310U. Power supply?
This TV has no picture and is dead, I have the rear cover off.
With both inverters connected, the mainboard puts out all the nessessary voltages. If I attempt to power it up with inverters connected, The L.E.D stays lit but the 12 Volt and the 24 Volt disappear. -
Standby Transformer Voltage
I am getting O Volts out of this. By the looks of the schematic, my voltages are not what they should be. I will try to upload schematic.... -
Re: Sharp LC52LE810UN Startup error
Flashing short, long, short, long.
How do I enter service mode? -
Sharp LC52LE810UN Startup error
I have done a bit of homework on this. The strange thing here is that If start TV in service mode, it is fine, works great. Only after unplugging, does it error on startup. Please help! -
Panasonic TC-P50G15 6 Blinks
*I have 6 Blinks on LED
What is the next best step?
No activity results to display
Leave a comment: