LCD Panel TAB Bond fix ?

Collapse
X
Collapse
+ More Options
Posts
 
  • Time
  • Show
Clear All
new posts
  • Sevenqi
    Badcaps Veteran
    • Jul 2011
    • 292

    #1

    LCD Panel TAB Bond fix ?

    A 42" LCD Screen panel, it worked good before but the 2 and half of the Tab Bonds were torn/broken by accident on the right side, the left side is good.
    The broken tab bond is not that bad, still complete, looks like to disconnect, but I know there is no way to fix it by soldering. Anyone have experience to use hot gun or something else to connect it?
  • Sevenqi
    Badcaps Veteran
    • Jul 2011
    • 292

    #2
    Re: LCD Panel TAB Bond fix ?

    Attached a picture.
    Attached Files

    Comment

    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK

      #3
      Re: LCD Panel TAB Bond fix ?

      I don't think that can be fixed without a million-pound tab bond machine, sorry!
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

      Comment

      • Hobby 1
        Senior Member
        • Mar 2010
        • 86

        #4
        Re: LCD Panel TAB Bond fix ?

        There is a 3M product that may work. Conductive double sided tape. Conducts only along the thickness of the tape. Very expensive. 24 hr cure time. I bought a sample of it but can't find the pdf document with the product name.

        Comment

        • Hobby 1
          Senior Member
          • Mar 2010
          • 86

          #5
          Re: LCD Panel TAB Bond fix ?

          Found it. 3M 9703 Conductive Adhesive. Someone selling small strips of it on ebay. $5.00 per foot. Worth a try.

          Comment

          Related Topics

          Collapse

          • Glaval
            Sony OLED XBR-65A8G 4 flashes
            by Glaval
            Hello, my Aunt recently gave me her broken Sony XBR-65A8G OLED after getting a replacement. It had a 4x led flash error, a replacement T-con didn't fix the error but with helpful info from this forum I found one of the smd ceramic caps on the panel pcb (C575/C378) on a 24v line was shorted to ground. I removed that cap and the tv turned on without error. It still had a black screen with the original t-con back in it, once I put the replacement t-con in it finally had a picture. After doing a panel refresh it had a very good picture but with a few vertical lines for some scenes. For owners with...
            01-23-2025, 04:04 PM
          • howardc64
            LG 49UJ6500 LCD panel lighter band that goes away
            by howardc64
            49UJ6500 LCD panel has a lighter band on top when first powered on. Goes away (or gets much fainter) after TV on for a few min. After powered off for awhile and power back on, same band appears. If powered on immediately after powering off, no or much fainter band. Running the latest firmware.

            Disassembled the TV and lifted the LCD panel during testing. Band is on the LCD panel (can see the band on the panel as I lift it slightly) Backlight is perfectly even at the top edge. Double checked LCD panel alignment in the frame and is perfect but since band moved with the panel, its on...
            02-19-2023, 12:13 AM
          • Storyteller12
            QN55Q60R Service Menu Panel Help
            by Storyteller12
            I had a the above tv qn55q60r that had a bad panel but everything else good. I had another panel here from un55nu6900 with bad leds and melted diffusers.

            I put the nu6900 panel in and powered it up and it does work but there are lines vertical lines.

            I was trying to change the panel type in the service menu but don’t see my exact panel. Anyway to fix this or someone have similar experience.

            the clear picture is the panel type from the service menus on the nu6900. The other 1 is the panel type that was set for the q60r with the bad panel....
            01-13-2024, 01:57 PM
          • fixxy88
            Panasonic 55DX600u second fault - panel brightness pulsing on right side
            by fixxy88
            After getting the backlights up and running a second fault has emerged on this TV. I was going accept defeat and move on but thought I'd have a quick look at it in case it was something simple. The right side of the display exhibits a panel brightness (not backlight brightness) pulse every 2-3 seconds in a stable timing.

            I poked about on the TCON test points and found one voltage that is fluctuating in the same pattern. VGH-ODD (Pin 47 of U10) is sitting at ~-6.5v then goes up to ~28v when the brightness pulses then goes back down to ~-6.5v again in a repeating pattern.
            ...
            03-22-2023, 02:58 AM
          • sigmeyer
            43UM7100PLB, no picture but have half picture when i disconnect 1 side of panel
            by sigmeyer
            Like the title says , this is a very interesting problem , never experienced this before so i thought i'd share and maybe get some help on this. So the problem is as such: TV comes on , some gibberish flashes on screen and the screen remains black , the owner of tv said he heard sound. Now i checked some things cleaned all connections first of all so i dont run in a circle. Then i disconnected one of the cables for the panel , and viola, the left side of screen comes on, then i tried to switch it , with left side disconnected and right connected. Same problem persists. I checked some voltages...
            09-09-2021, 10:30 AM
          • Loading...
          • No more items.
          Working...