Announcement

Collapse
No announcement yet.

User Profile

Collapse

Profile Sidebar

Collapse
Avatar
Glaval
New Member
Last Activity: 01-23-2025, 07:28 PM
Joined: 01-23-2025
Location: Columbus,OH
  •  
  • Filter
  • Time
  • Show
  • Source
Clear All
new posts

  • Removing it was no problem, soldering the flea sized thing was a different story unfortunately. I did pick up some flux and been using it since and wiping the board with isopropyl afterwards. I will remove that final cap, it has been giving different capacitance readings compared to it's mirrored cap on the other side panel pcb. I will practice on the bad t-con, then try to get them back on, thanks!
    See more | Go to post

    Leave a comment:


  • Sony OLED XBR-65A8G 4 flashes

    Hello, my Aunt recently gave me her broken Sony XBR-65A8G OLED after getting a replacement. It had a 4x led flash error, a replacement T-con didn't fix the error but with helpful info from this forum I found one of the smd ceramic caps on the panel pcb (C575/C378) on a 24v line was shorted to ground. I removed that cap and the tv turned on without error. It still had a black screen with the original t-con back in it, once I put the replacement t-con in it finally had a picture. After doing a panel refresh it had a very good picture but with a few vertical lines for some scenes. For owners with...
    See more | Go to post

  • Happy to be here, I'm hoping to learn a few things and help when I can.
    See more | Go to post

    Leave a comment:

No activity results to display
Show More
Working...
X