Need some help on this one. I've got a 50pg20 plasma that the picture quit on me. Sounds still works just no picture.
I recently replaced the power board...I also checked it just now and all the readings with a dmm, everything is fine with the power board.
My YSus board is not heating up, I can physically feel my ZSus board heating up, but my YSus board is ice cold(the heat dissapaters) when I hook up the power. I have checked all voltages both leaving the power board and also all voltages entering the YSus board. Just to be safe, I bought a new YSus board thinking that was the problem. The new YSus board is also ice cold to the touch after hooking up power. Lastly, I disconnected the power in to the YSus board and checked the circuits in the board, all checked out from a pin check.
What in the world could the problem be that 2 different YSus boards have power in to them but neither will heat up and act like they are working??
I recently replaced the power board...I also checked it just now and all the readings with a dmm, everything is fine with the power board.
My YSus board is not heating up, I can physically feel my ZSus board heating up, but my YSus board is ice cold(the heat dissapaters) when I hook up the power. I have checked all voltages both leaving the power board and also all voltages entering the YSus board. Just to be safe, I bought a new YSus board thinking that was the problem. The new YSus board is also ice cold to the touch after hooking up power. Lastly, I disconnected the power in to the YSus board and checked the circuits in the board, all checked out from a pin check.
What in the world could the problem be that 2 different YSus boards have power in to them but neither will heat up and act like they are working??
Comment