Lg 50px5d-ab firmware upgrade dtvlab

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • tw2005
    Badcaps Legend
    • Oct 2011
    • 6458
    • Australia
    #1

    Lg 50px5d-ab firmware upgrade dtvlab

    Anyone tried a firmware update using the service port before. I got the software and file but can't get it to flash.

    Connected to the TV ok, screen on set went to update, followed the instructions, selected the file for the 50px5d-ab, decompressed, unpacked and ended with "downloading application size too enough (3276312) > (3211264)!!!"

    what went wrong?

    03:51:06 - 50PX5DAB
    03:51:08 - D
    03:51:08 -
    03:51:08 - [DEBUG Main Menu]
    03:51:08 - 0x10: System menu
    03:51:08 - 0x14: Sevice download
    03:51:08 - 0x15: factory menu
    03:51:08 - 0x20: NTSC menu
    03:51:08 - 0x25: ATSC TP menu
    03:51:08 - 0x30: Audio menu
    03:51:08 - 0x35: Adec menu
    03:51:08 - 0x40: Vdp menu
    03:51:08 - 0x41: DebugHd2chip
    03:51:08 - 0x45: Vdec menu
    03:51:08 - 0x50: Front End menu
    03:51:08 - 0x70: Gpio Test menu
    03:51:08 - 0x80: DVI Test menu
    03:51:08 - 0x88: Channel Manager menu
    03:51:08 - 0x99: PSIP menu
    03:51:08 - 0xa1: Closed Caption menu
    03:51:08 - 0xaa: KBPS menu
    03:51:08 - 0xb0: ADJ RGB Value
    03:51:08 - 0xb1: Restore RGB Value
    03:51:08 - 0xbb: UI menu
    03:51:08 - 0xc0: UART PRINTF menu
    03:51:08 - 0xc1: PalTuner debug
    03:51:08 - 0xd0: OSD menu
    03:51:08 - 0xd1: RF switch
    03:51:08 - 0xd2: EPF menu
    03:51:08 - 0xf0: Flash Download
    03:51:08 - 0xf1: Fast Power On
    03:51:08 - 0xf2: CTO ZOOM Test
    03:51:08 - 0xfd: DLP debug
    03:51:08 - 0xfe: Display Version INFO
    03:51:08 - 0xff: EXIT from Main DEBUG Menu
    03:51:08 -
    03:51:27 - Select Command: 0xF0
    03:51:27 -
    03:51:27 - [FLASH Download Menu]
    03:51:27 - 0x1: Download Application!
    03:51:27 - 0x2: Download CPLD
    03:51:27 - 0x3: Go to Boot up menu!
    03:51:27 - 0x4: System Reset
    03:51:27 - 0xff: Exit from this menu
    03:51:27 -
    03:51:36 - Select Command: 0x1
    03:51:36 -
    03:51:36 -
    03:51:36 - ================================================== ==
    03:51:36 - == ==
    03:51:36 - == FLASH ROM Code Downloader V0.90 ==
    03:51:36 - == ==
    03:51:36 - == for LGE Affordable HDTV Board, thru Serial ==
    03:51:36 - == ==
    03:51:36 - ================================================== ==
    03:51:36 - Description : Affordable Boot Code
    03:51:36 - Compiled by : choiyunjung
    03:51:36 - Compiled at : Thu May 26 16:38:34 2005
    03:51:36 -
    03:51:36 - DON'T PRESS THE KEYBOARD!!!!!
    03:51:36 - I'm ready, send binary data(application rom.pak)
    03:53:49 - ################################################## ################################################## ################################################## ################################################## ################################################## ######03:53:49 - 0x144424(1328164) bytes received.
    03:53:49 - Serial binary download completed.
    03:53:50 - CRC check about downloaded image ... O.K
    03:53:50 - Expand the compressed image at 0x0c700000
    03:54:28 - 100%
    03:54:28 - Unpacked from 0x144416 bytes to 0x31fe18 bytes
    03:54:28 -
    03:54:28 - FLASH manufacturer ID = 0x001f001f
    03:54:28 - FLASH device ID = 0x88c388c3
    03:54:28 -
    03:54:28 - !!! ERROR : Downloading application size is too enough(3276312 > 3211264)!!!
    Tags: None
    • Th3_uN1Qu3
      Believe in
      • Jul 2010
      • 6031
      • Romania
      #2
      Re: Lg 50px5d-ab firmware upgrade dtvlab

      It says the new image is too big to fit.
      Originally posted by PeteS in CA
      Remember that by the time consequences of a short-sighted decision are experienced, the idiot who made the bad decision may have already been promoted or moved on to a better job at another company.
      A working TV? How boring!

        Comment

        • tw2005
          Badcaps Legend
          • Oct 2011
          • 6458
          • Australia
          #3
          Re: Lg 50px5d-ab firmware upgrade dtvlab

          I got the solution from someone. The boot code has to be updated first with another file to allow for the larger size. Did that and upgrade now loaded.

            Comment

            • cheebster
              Badcaps Veteran
              • May 2008
              • 373
              #4
              Re: Lg 50px5d-ab firmware upgrade dtvlab

              tw2005, how do you proceed to upgrade the firmware on lg plasmas ? i've never seen much info on how to do this, hardware and software wise ? thanks in advance

                Comment

                Previous template Next

                Related Topics

                Collapse
                • Document Archive
                  LCD LED TV Service Menu Codes
                  by Document Archive
                  ALL LCD LED TV SERVICE MENU CODES

                  Service Menu Code with Board Name

                  China Universal Board / Jumper Board Service Menu Code
                  Changhong Ruba Service Menu Code
                  Ecostar LED TV Service Menu Code
                  Orient LED TV Service Menu Code
                  Haier LED TV Service Menu Code
                  TCL LED TV Service Menu Code
                  Samsung LED TV Service Menu Code
                  LG LED TV Service Menu Code
                  Videocon LED TV Service Menu Code
                  Supra LED TV Service Menu Code
                  Toshiba LED TV Service Menu Code
                  Symphony LED TV Service Menu Code
                  Veste/ LED TV Service Menu Code...
                  10-31-2024, 03:58 AM
                • hinisa
                  Xiaomi router freezes at boot after re-capping
                  by hinisa
                  I'm using Xiaomi Router 4A gigabit edition as wireless repeater. It worked fine for 2 years or so, but last week, wireless started to disappear.

                  When I unplug/replug the power, it was working fine for a day/half a day or so until it freezes again.

                  After testing with different power supply adapters and concluding it wasn't the issue I finally opened the case and this was the situation:



                  Anyway I proceed to clean up the mess and replace all caps but unfortunately it made the situation worse. Now router can't even boot, either it freezes during...
                  07-08-2023, 05:58 AM
                • ekozeko333
                  [Help] Lenovo Yoga Slim 7-14ARE05 (DA0LS3MBAF0) – 25Q80DVN1G Flash Is All FF, USB-C PD Stuck at 5V
                  by ekozeko333
                  Hi all,
                  I’m trying to recover a Lenovo Yoga Slim 7-14ARE05 with board DA0LS3MBAF0 Rev:F. I’ve run into an unusual issue where USB-C PD is stuck at 4.7–5V and the system won’t boot (keyboard lights flash briefly, then nothing).
                  🔥 The Problem Started After Suspected ESD/PD Fault
                  I experienced a power issue or ESD event through a USB-C charger
                  After that, the NX20P5090 power switch was visibly burned and was replaced
                  Now the PD controller always negotiates 5V @ 2A, even with known-good chargers
                  🧠 What I’ve Done So Far
                  Flashed...
                  06-21-2025, 02:48 AM
                • dragometin
                  Hitachi 40HYC42
                  by dragometin
                  TV Model: Hitachi 40HYC42
                  Power Supply: 17IPS71
                  MainBoard: 17MB95M
                  Panel: VES400UNDS-2D-NO3

                  When the set came in it was dead. Fuse was open primary side and the power mosfet was shorted. So I ordered a new power supply. Now it turns on, only displays "Hitachi" and then power off red and blue led flashing.

                  I had to modify the 0ohm resistors in the led backlight of the new PS like the original power supply.
                  Is there any variants on 17IPS71 power supply's?

                  UART output pins 10 and 12 on scart connector:

                  Code:
                  12:24:04.595
                  ...
                  08-08-2024, 05:53 AM
                • corrize
                  Nikon D800 camera - flash don’t work and capacitor don’t charge
                  by corrize
                  Hello, I'm stuck in troubleshooting…
                  The flash system works like that : when the (mechanic) flash button is pressed, the flash mecanically pop up, and a circuit buck boost elevate 7v (batt) to 200-300v (?) for charging the big capacitor. And when the photo shoot button is pressed, the capacitor is discharged in the xeon light.

                  In the D800, there is a first « power board » close to the battery. 2 wires (batt 7v) goes to another little « flash board ». I measured 7v, so ok.
                  When I press the flash button, it's detected by the system, flash icon appear on LDC display....
                  10-01-2022, 10:02 AM
                • Loading...
                • No more items.
                Working...