Possible Element FLX-3710 Purchase

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Paul678
    Badcaps Veteran
    • Nov 2011
    • 402
    #1

    Possible Element FLX-3710 Purchase

    This is not a simple power supply or inverter problem.

    The unit turns on, and the RED power led turns to blue
    when I pushed the ON/OFF button.

    But there is no menu or picture....only blue horizontal
    lines, with some occasional white digital blocks. No
    sound either. But the backlight clearly works correctly.

    What you all think? LCD controller board? Main input
    board? T-con?

    He agreed to $15, but he doesn't have the original remote,
    but some universal one that he claims will work.

    Tags: None
    • Dgtech
      E. Technician
      • Apr 2009
      • 1462
      • Steeler
      #2
      Re: Possible Element FLX-3710 Purchase

      Sounds easy to me. Try to get a picture of the failure before you buy it.

      It sounds like a T-con problem. There are T-Con boards for this TV on ebay for about $20 and a remote for it about 23.
      The strong-minded rise to the challenge of their goals,the weak-minded BECOME HATERS

        Comment

        • tom66
          EVs Rule
          • Apr 2011
          • 32560
          • UK
          #3
          Re: Possible Element FLX-3710 Purchase

          Quite possibly a power supply problem: low supply voltages from bad caps can cause video glitches.
          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • x_orange90_x
              TCL 50S535 bad tcon or panel issue?
              by x_orange90_x
              Just bought this for 10 bucks yesterday hoping to fix it. The guy said water dropped inside from a dehumidifier hose and it started showing black and white vertical bars then went blank. When I got it home and turned it on it came on fine and displayed correctly but I was noticing faint vertical bars in the image. After a little bit I turned it off and back on and it was a black screen again. I opened it up to check for water damage and corrosion but didn't find anything of the sort. I cleaned the ribbons anyway and reconnected them but still got a blank screen. If I disconnect the right side...
              03-29-2025, 11:02 PM
            • advant
              Driving a Sharp TCON/panel with a universal main board
              by advant
              This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

              I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
              02-03-2020, 12:25 AM
            • Daren87
              Sony 8K XBR-75Z8H White Screen Vertical Bars Tcon Code. Help NeededπŸ™
              by Daren87
              Hello everyone,

              I've recently been given a Sony 8k Z8H. It's got a white screen with two vertical black bars. At times it's given me the 5 blink Tcon code. Testing voltage on the Tcon I can see some low or missing voltage. I've done a basic visual check of cables and the COF. Not seeing anything obvious. The original Tcon seemed to have good caps until turning it over. On the bottom I found maybe 10 caps with both sides of the caps shorting to ground. I thought ok these caps and likely other components on the Tcon are shorted so let's try a replacement Tcon. I just received the...
              08-13-2023, 03:25 PM
            • Stephen
              MacBook Pro 14" M1 Pro Turns on functions then turns off when I plug in USB C cable
              by Stephen
              MacBook Pro 14" M1 Pro Turns on functions then turns off when I plug in USB C cable to reset the computer. I disconnect the battery fully and then reconnect it and it won't turn back on. After letting it sit for a day I plug the battery back up, and the MagSafe 3 cable and it powers on and stays ons, once I plug in a USB C cable into the port closes to the MagSafe port it turns off and the Amber light turns off and won't turn on. No water damage, nothing, I want to do a DFU restore to wipe the computer since the customer stated they did an update and ever since it just decided to not work...
              03-15-2024, 09:37 AM
            • alltvrepairs
              Lg TCon test pins for screen test
              by alltvrepairs
              Hi,
              i have a 65 Panasonic TX-65HX710E using vestel 17MB170 main and Lg tcon.

              Few drops of water fell probably near COF and have no display. Tried removing tabs but no.part of display present as if tcon fuse open. However 12v is present and tcon can be felt warm enough that supplies are present. Backlight and sound ok.

              Anyone knows if this TCon 6870c-0805A has any special test pins for rgb test?

              Appreciate your help....
              2 Photos
              06-13-2025, 06:33 AM
            • Loading...
            • No more items.
            Working...