Insignia NS-L26Q-10A no pic or sound or light

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Joatmon
    New Member
    • Aug 2012
    • 3
    • USA

    #1

    Insignia NS-L26Q-10A no pic or sound or light

    I trying to help a friend out he has a Insignia NS-L26Q-10A that will not power up no light at all no where. I open it up and check the capacitors and I do not find any that looks bad. I check the voltage from the power supply and only have 5 volt no other volt reading.
    Power supply number is 715G2907-1-3 my question is, is it the power supply or the main board?
    Sorry I don't have any pictures.
  • selldoor
    Slow Learner
    • Dec 2010
    • 7870

    #2
    Re: Insignia NS-L26Q-10A no pic or sound or light

    Are you likely to have any pictures -without them its very difficult.

    "Power supply number is 715G2907-1-3 my question is, is it the power supply or the main board?"

    Its a bit like saying My car wont go- its a blue ford with v6 engine - the lights come on - my question is is it the battery, the plugs, carb , petrolpump, engine,clutch, gearbox.

    Try checking any fuses and fusible resistors front and back of boards.
    Loose connectors, loose components, cold joints resolder transformer joints
    big resistors and big diodes.
    Please upload pictures using attachment function when ask for help on the repair
    http://www.badcaps.net/forum/showthread.php?t=39740

    Comment

    • Joatmon
      New Member
      • Aug 2012
      • 3
      • USA

      #3
      Re: Insignia NS-L26Q-10A no pic or sound or light

      Thanks I will look at it more and check more out. I was trying to get pointed in the right direction like the power supply or main board and you said it cold be ether one so I guess I will start with the power supply.
      Thanks Again

      Comment

      • retiredcaps
        Badcaps Legend
        • Apr 2010
        • 9271

        #4
        Re: Insignia NS-L26Q-10A no pic or sound or light

        Originally posted by Joatmon
        I was trying to get pointed in the right direction like the power supply or main board and you said it cold be ether one so I guess I will start with the power supply.
        If you have no power LED at all but have 5V standby on the power supply, start with the main board and check the voltage regulators. I have written about how to measure the above several times especially for Vizio TVs.
        --- begin sig file ---

        If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

        We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

        Please do not post inline and offsite as they slow down the loading of pages.

        --- end sig file ---

        Comment

        • budm
          Badcaps Legend
          • Feb 2010
          • 40746
          • USA

          #5
          Re: Insignia NS-L26Q-10A no pic or sound or light

          Does it look like this?
          http://www.shopjimmy.com/insignia-ad...upply-unit.htm
          We are trying to troubleshoot the problems without having the TV or the boards in front of us, so good pictures are a must.
          There are more than one version and manufacturers for this model.
          Never stop learning
          Basic LCD TV and Monitor troubleshooting guides.
          http://www.badcaps.net/forum/showthr...956#post305956

          Voltage Regulator (LDO) testing:
          http://www.badcaps.net/forum/showthr...999#post300999

          Inverter testing using old CFL:
          http://www.badcaps.net/forum/showthr...er+testing+cfl

          Tear down pictures : Hit the ">" Show Albums and stories" on the left side
          http://s807.photobucket.com/user/budm/library/

          TV Factory reset codes listing:
          http://www.badcaps.net/forum/showthread.php?t=24809

          Comment

          • Joatmon
            New Member
            • Aug 2012
            • 3
            • USA

            #6
            Re: Insignia NS-L26Q-10A no pic or sound or light

            Yes it does and thanks for the help. I'm working some long hours and will be off for a while after Thursday and I will post some pictures after I do a few more test.

            Comment

            Related Topics

            Collapse

            • MOSSEP
              Monitor Audio RSW12 - Green light, but no sound
              by MOSSEP
              Hi

              Im hoping someone might be able to give me some idea of what may be wrong with my Monitor Audio RSW12 Sub.

              Ive owned it since new in around 2002, so would really like to keep it running if I can, it was the first ‘decent' bit of audio equipment I ever purchased and is a little sentimental.

              The issue I had was that it would power up with the red light, but sometimes the green light would not come on and I would get no bass from it. If the green light did come on though, I would get sound out of it.

              I have already tried replacing all of the...
              01-26-2025, 08:33 AM
            • sam_sam_sam
              Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
              by sam_sam_sam
              I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

              One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
              03-31-2024, 02:12 PM
            • Tynan Dill
              Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
              by Tynan Dill
              I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

              Upon bringing it home and plugging it up, it showed a standby light.

              I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

              The screen seems to blackout and stay black, but with a flashlight I can see the display.

              With my Playstation 4 connected via HDMI, and running a game I can hear sound.

              Assuming...
              11-22-2024, 01:46 PM
            • shovenose
              Christmas Light Power Supply Question
              by shovenose
              Hi all,
              I have a cheap rainbow christmas light set off Amazon which has this little power supply that has a button to change modes. I had a white set with the same power supply that I returned but I can't find any other rainbow themed ones that don't use this setup.

              Anyway, the problem is every time you unplug them and then plug them in it reverts back to "Combination" mode which cycles through all these annoying tacky effects instead of going back to what you had selected or at least defaulting to "Steady on" which is what I want. So I'm thinking I can just...
              12-08-2023, 09:59 AM
            • burntonnerings
              Acer K272HUL blue power light but black screen, power supply is ok
              by burntonnerings
              Have had two Acer K272HUL monitors die with the same symptoms:

              - Blue power light is illuminated while the monitor is plugged in
              - Black screen (no splash screen, etc.)
              - Power button doesn't do anything

              Opened it up and checked for bad caps and components, evidence of burns, etc. - everything looks fine.

              Power supply voltages are fine.

              There are some signal lines on the power supply harness that goes from the power supply to the logic board, not sure what these should be at.

              Anyone have any ideas?...
              12-09-2023, 10:22 PM
            • Loading...
            • No more items.
            Working...