I am working on a Hitachi RPT for the local vet club, it has a the standard convergence issue.. But before I jump and buy the ICs that may need changed, I noticed a resistor right by one on the ICs that is burned a bit.. I would like to replace it first just to see if thing in prove... Its a 1.5ohm 1w.. I have a 1.8ohm 1w... Can I use this 1.8 instead of ordering a 1.5???
-
-
Re: Quick Resistor Value Question
should be ok if the original resistor has a 5% tolerance might be somewhere near itfixed so far...376 lg lcd tv's,24 onn tv;s,24 panasonic lcd,16 jvc lcd,12 marshall jcm800 amps,refurb of various disco equipment lighting,old style disco decks ,and a flymo!
----------------------------------------------
please let us know if everything works ok if your tv gets fixed, as it will be and aid for anyone else having the same problem and wishing to fix it.it would save people clogging up this site with topics that are duplicated,and can be found easily using the search function.,and taking up valuable space.enjoy your fixed tv!,hopefully! -
Re: Quick Resistor Value Question
The service manual states that its 5% and that what mine 1.8 is ... ThanksOriginally posted by multimeter View PostComment
-
Re: Quick Resistor Value Question
Be aware that there several low value resistors in the area that should be checked. These are flame proof resistors and must be replaced with the same type for safety.Comment
-
Re: Quick Resistor Value Question
Yep its flame proof.. Thats what I got from another project, just 1.8 instead of 1.5..Originally posted by truep View PostComment
Comment