Westinghouse SK-32H240S - blue light, wont turn on

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • reeferman
    New Member
    • Feb 2013
    • 9
    • USA

    #21
    Re: Westinghouse SK-32H240S - blue light, wont turn on

    Brand new to this site. I have one of these sets that I haven't looked at in a while, but will get back into it now that I have found this thread.
    Phil

    Comment

    • awyatt2
      Badcaps Veteran
      • Feb 2012
      • 407
      • america

      #22
      Re: Westinghouse SK-32H240S - blue light, wont turn on

      check the voltage regs and the fuses and diodes on the inverter board the vr's usually fail.common in westinghouse brands

      Comment

      • Dblueman
        Senior Member
        • Nov 2012
        • 84
        • United States

        #23
        Re: Westinghouse SK-32H240S - blue light, wont turn on

        Thought I'd add to this post. I have this model and here's what I've been told.
        On the main power supply circuit board you should see 3 inverter transformers, (look like little gray bars.) These are nortious for going bad. My unit would turn on and then there would be no picture and no sound. My set now has a cracked screen due to shipping with UPS which looks like a spider web accrossed it. But again I'm told this is usually the case with this t.V.
        Last edited by Dblueman; 02-03-2013, 07:12 PM.

        Comment

        • reeferman
          New Member
          • Feb 2013
          • 9
          • USA

          #24
          Re: Westinghouse SK-32H240S - blue light, wont turn on

          I will do that awyatt2.
          just checked the electrolytic caps and all are good.
          thanks
          Phil

          Comment

          • lnlkustomz2007
            Member
            • Aug 2013
            • 11
            • usa

            #25
            Re: Westinghouse SK-32H240S - blue light, wont turn on

            i have the same problem, have you got anywhere with this? same tv as well.

            Comment

            • jesselyons2002
              Senior Member
              • Jul 2013
              • 82
              • usa

              #26
              Re: Westinghouse SK-32H240S - blue light, wont turn on

              Yeah this tv are known for the inverters burning out. I replace two of this tv with new inverters.

              Comment

              • Bravo20
                New Member
                • Jun 2015
                • 1
                • mexico

                #27
                Re: Westinghouse SK-32H240S - blue light, wont turn on

                I have the same problem in the CN200 connector I have all voltages
                Pin 22 of CN200 have 5 volts,
                the primary side large filter cap has 400V DC When TV is turn on t 140v before turning

                any brightness is seen on the screen

                Comment

                Related Topics

                Collapse

                • TurboTundra
                  PS5 EDM-033 Blue Light 2 Sec then Powers Off
                  by TurboTundra
                  Hi, I am waiting for my uart tool so I can grab an error code and narrow down where my issue is, but I decided to measure capacitors and fuses to insure everything was okay.

                  The PS5 turns on with a blue light and a beep for 1-2 seconds then turns off. I noticed a grey capacitor measures no voltage on standby or input power. Does this indicate a problem with the capacitor or something down on the line? I’m getting 3.3v on input with the red cap next to the grey one, and 5.2v on input with the red cap further away from the grey cap.



                  Thank you for any input...
                  06-10-2025, 08:51 PM
                • icareservicezone
                  Synology DS918+ blue light blink
                  by icareservicezone
                  Synology DS918+
                  Model name : GDI41L2
                  p/N: 08-06GDI4116
                  Version: V1.6
                  Problem : blue light blink...
                  05-24-2025, 11:53 PM
                • cajoeg
                  Insignia NS-LCD019-09 issue: Power light turns blue for 3 seconds, the flashes red before going solid read again
                  by cajoeg
                  Hello, I'm new to the group and to trying to repair a LCD TV. During the past few years, I've been collecting/repairing/restoring vintage personal computers (Commodore, Apple II, Atari, TRS-80, Texas Instruments, and Timex Sinclair). This has been my retirement hobby. Now I've gotten interested in trying to repair a LCD TV that I have and used regularly when working on vintage computers.

                  The LCD I'm working on is a Insignia NS-LCD019. I've downloaded the service manual that I could find, but it must be a different revision since not too many items in the service manual match the TV...
                  02-10-2025, 04:01 PM
                • dionzarek
                  PS5 Slim EDM-040 Only turn on 1 Sec, Blue light then immediate off.
                  by dionzarek
                  Hello everyone, I am new to this PS5 troubleshooting, I need help on diagnosing the problem. My PS5 Slim board EDM-040 that beep and only shows blue light then immediately turn off.

                  I've checked the PSU its normal 12V. I've checked all the capacitors its all good no shorts, but there are 2 caps shorted, I think its near the SSD. You can look at the image attachment.

                  When tested it only shows 0.003 while other caps show 0.4 to 1. WHen in continuity mode those 2 caps goes beep/shorted.

                  Any help to where should I check on or suggestion would be very appreciated....
                  02-08-2025, 11:00 PM
                • burntonnerings
                  Acer K272HUL blue power light but black screen, power supply is ok
                  by burntonnerings
                  Have had two Acer K272HUL monitors die with the same symptoms:

                  - Blue power light is illuminated while the monitor is plugged in
                  - Black screen (no splash screen, etc.)
                  - Power button doesn't do anything

                  Opened it up and checked for bad caps and components, evidence of burns, etc. - everything looks fine.

                  Power supply voltages are fine.

                  There are some signal lines on the power supply harness that goes from the power supply to the logic board, not sure what these should be at.

                  Anyone have any ideas?...
                  12-09-2023, 10:22 PM
                • Loading...
                • No more items.
                Working...