More to mess with ...

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jimmy Nolins
    Member
    • Feb 2012
    • 41

    #1

    More to mess with ...

    picked up some more broken Sets today to learn on . A nice person donated these to me for the cause .

    2 Sony Wega KDF-50WE655

    1 Sony KDL-52XBR4 (2008 model , might try to actually fix this one down the road

    1 Samsung Dlp HC-R4667W

    1 Sharp Aquos LC-42D62U

    1 Westinghouse LTV-Y0W1HDC

    1 BiG RCA D52W20

    The 2 Wega one powers one stays red light / The 52 inch Bravia pic is shown below is newer then the 50 inch i was planning on getting fixed end of this week .
    Attached Files
  • Jimmy Nolins
    Member
    • Feb 2012
    • 41

    #2
    Re: More to mess with ...

    Humm ok heres new pic of the BRAVIA after i left it plugged in for about 20 mins ( give or take a few mins )
    Attached Files
    Last edited by Jimmy Nolins; 03-06-2012, 09:18 PM.

    Comment

    • retiredcaps
      Badcaps Legend
      • Apr 2010
      • 9271

      #3
      Re: More to mess with ...

      I suggest you create separate threads for each TV. Keeping track of all them in one thread will lead to a lot of confusion.
      --- begin sig file ---

      If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

      We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

      Please do not post inline and offsite as they slow down the loading of pages.

      --- end sig file ---

      Comment

      • tom66
        EVs Rule
        • Apr 2011
        • 32560
        • UK

        #4
        Re: More to mess with ...

        The Bravia has bad tab bonds - easy fix sometimes.
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • Jimmy Nolins
          Member
          • Feb 2012
          • 41

          #5
          Re: More to mess with ...

          Retiredcaps , i will be for sure .
          tom66 , i will look into it some and post new thread . Fiqure also might of been a bad solder as it fine as it gets heated .

          Hopefully soon , work been crazy busy .

          Comment

          Related Topics

          Collapse

          • PopsCaps
            Sony Bravia KDL-40V2500 that will not power on
            by PopsCaps
            I have a Sony Bravia KDL-40V2500 that will not power on. The indicator flashes red 3 times.
            I do not hear any sound and I cannot see any backlight.
            I have tried disconnecting every cable on each board one at a time to see if anything changes.
            The only change is when I disconnect AC-DET cable on the Power Supply board or on the other end if I unplug the CN7009 connection on the B-Board and try to power on the TV the indicator will stay on solid green until I power off.
            My friend ordered another used power supply board but it is also doing the red indicator flash 3 times...
            03-25-2025, 11:23 AM
          • Document Archive
            Sony Bravia 22" LED Full HD TV KLV-22P402B Schematic
            by Document Archive
            Sony Bravia 22" LED Full HD TV KLV-22P402B Schematic...
            10-16-2024, 05:15 AM
          • justin35
            Sony bravia kdl-43w755c - boot loop
            by justin35
            Hello,
            i have this sony bravia kdl-43w755c which boot loops. After sony logo, it shows the android animation loading then it restarts…
            from what i read online it looks to be an emmc issue…
            i’m not familiar with this kind of tv repairs… i’m repairing laptops and gpu’s…
            i took out the board and say an samsung 16gb emmc
            i don’t have an exact replacement, but i have a few 32 and 64gb emms’s from laptops…
            i could try to put one instead of the 16gb one, but will it work?
            where do i get the software from?
            any help will be much appreciated!...
            03-06-2024, 12:26 PM
          • Spc.
            Sony Bravia KD43XF7596BAEP - Android no picture
            by Spc.
            Greetings everyone.
            I also have Sony Bravia, model:
            Sony Bravia KD43XF7596BAEP - Android.

            What happend is that image dissapeared while we were watching tv.

            Diagnostics:
            1. TV turns on, no errors
            2. Backlight turs on, no errors
            3. Power indicator turns on, white color, no errors
            4. Menu works on android, you can hear sound while switching channels
            5. Volume up and down works via TV remote and via buttons
            6. Tunner works, HEVC / MPEG-4 decoder works
            7. I get audio from channels
            8. No picture is present,...
            05-19-2022, 04:28 AM
          • pbig
            advices for repairing Sony Bravia 32EX600 after lightning strike
            by pbig
            hi everyone,
            my parents in law have seen their Bravia Sony LED 32EX600 TV set stop after a lightning strike. After being plugged to mains, it shows nothing no power LED on bottom left shines.
            On the power PCB (GE3b, attached pic), I chacked the fuses and the only roasted one is R6536 : 0.47 ohms, 1/2W. After replacing it, I made some voltage measurement with ref to the chassis :
            - the 450V/150uF capacitor voltage when plugged is normal at 394V
            - from connector CN6150 (15 poles)
            STBY normal 3.3V -> I shunted it to 3 (POWER ON) and 11 (BL ON) and unplugged...
            06-28-2023, 02:43 AM
          • Loading...
          • No more items.
          Working...