Announcement

Collapse
No announcement yet.

More to mess with ...

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    More to mess with ...

    picked up some more broken Sets today to learn on . A nice person donated these to me for the cause .

    2 Sony Wega KDF-50WE655

    1 Sony KDL-52XBR4 (2008 model , might try to actually fix this one down the road

    1 Samsung Dlp HC-R4667W

    1 Sharp Aquos LC-42D62U

    1 Westinghouse LTV-Y0W1HDC

    1 BiG RCA D52W20

    The 2 Wega one powers one stays red light / The 52 inch Bravia pic is shown below is newer then the 50 inch i was planning on getting fixed end of this week .
    Attached Files
    Tags: None
    #2
    Re: More to mess with ...

    Humm ok heres new pic of the BRAVIA after i left it plugged in for about 20 mins ( give or take a few mins )
    Attached Files
    Last edited by Jimmy Nolins; 03-06-2012, 09:18 PM.

    Comment

      #3
      Re: More to mess with ...

      I suggest you create separate threads for each TV. Keeping track of all them in one thread will lead to a lot of confusion.
      --- begin sig file ---

      If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

      We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

      Please do not post inline and offsite as they slow down the loading of pages.

      --- end sig file ---

      Comment

        #4
        Re: More to mess with ...

        The Bravia has bad tab bonds - easy fix sometimes.
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

          #5
          Re: More to mess with ...

          Retiredcaps , i will be for sure .
          tom66 , i will look into it some and post new thread . Fiqure also might of been a bad solder as it fine as it gets heated .

          Hopefully soon , work been crazy busy .

          Comment

          Previous template Next
          Working...