Dell w4201c hd pdp hdtv plasma tv

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • shelby5041
    Badcaps Legend
    • Feb 2009
    • 1505
    • united states of america usa

    #21
    Re: Dell w4201c hd pdp hdtv plasma tv

    my question is what would cause the smaller pico fuse at f5006 to blow?

    Comment

    • shelby5041
      Badcaps Legend
      • Feb 2009
      • 1505
      • united states of america usa

      #22
      Re: Dell w4201c hd pdp hdtv plasma tv

      i was told that if the large ic shorted out....the large main fuse would blow...but it was ok

      Comment

      • shelby5041
        Badcaps Legend
        • Feb 2009
        • 1505
        • united states of america usa

        #23
        Re: Dell w4201c hd pdp hdtv plasma tv

        one other thing...vs is suppose to be 207...mine tested 235 on a cheap harbor freight multi meter...is that a concern or no big deal?

        Comment

        Related Topics

        Collapse

        • Bowline
          Dell E6400 PT434 type Battery Charging Stuck at 1%. Battery Pinouts?
          by Bowline
          My question pertains to understanding the control circuity inside a Dell PT434 type battery used in Dell E6400, E6410 and other Dell notebooks?

          Does anyone have a circuit diagram for the inside of a Dell PT434 battery and/or a description of how the control lines work to control this battery?

          My reason for asking is I have a battery which I cannot get to charge beyond 1% in a Dell E6410 or E6400.
          The LED bar graph charge indicator on the battery shows one LED lighted when the info button is pressed.
          I have tried multiple different Dell power adapters. My Dell...
          06-11-2025, 10:13 AM
        • Akhlz001
          Dell Pro 13 Plus PB13250 Bios Unlock
          by Akhlz001
          Hi,

          Could someone help trying to unlock this BIOS, seems that Dell have changed the layout of new Dell Pro 8FC8 bioses from checking HXD - 4000 bits do not need changing, only 2000. However after FF the section starting from '01000' upto 2000 bits and then soldering the chip back it seems that the microchip on the motherboard is recovering the bios back to original settings after first boot. Has anyone found a way to crack this extra layer of security Dell have implemented? Seems both HP and Dell have upped bios security to match Lenovo by implementing extra measures on a separate...
          09-20-2025, 07:15 PM
        • master3112
          Dell Inspiron 5590 Board 18778-1 no charging, charging not possible
          by master3112
          I would like to share my experience about charging issues with Dell power supplies with the tech community. I am working on a Dell Inspiron 5590, Mainboard 18778-1 with charging problems. The device can be switched on and works so far, only the message appears at startup:

          Alert! The AC power adapter wattage and Type cannot be determined. The battery may not change. The System will adjust the performace to match the power available.

          The power supply unit is not recognized in the Bios and the charging process is set to "idle". I use original Dell battery, type...
          07-29-2025, 01:55 PM
        • F R 2568
          Dell Latitude 5420 does not start (no post) need help to find the reason why
          by F R 2568
          Hello all,

          this is my first post, so if I make mistakes please do not hesitate to point them out, thank you in advance.

          I got a Dell Latitude 5420 (Service Tag: 7RFM6D3, Motherboard: GDF40 LA-491P Rev.: 2.0 (A01)) which does not start and I want to repair it. These are the symptoms:

          If the laptop is only connected to the AC adapter (battery removed):

          When I press the power button, the keyboard backlight and the display backlight are turning on. Caps key light is lightning, but key does not respond to pressing it.

          The power/battery...
          01-08-2025, 05:45 AM
        • KYBOSH
          Trying to Save - LG 60PH6700 60-inch plasma HDTV - Powers ON but no picture
          by KYBOSH
          Saved this beast from the landfill this weekend.
          Manfactured July 2013 in Mexico.

          I love working on plasma TVs.
          Its been a while but I was lucky enough to find 2 this week.

          The TV powers on and stays on but no picture. Havent checked for sound yet.
          No bulging caps although the insides are pretty dusty and the boards are discolored from many years of high heat.
          Will start troubleshooting tonight.

          ...
          10-17-2024, 01:17 PM
        • Loading...
        • No more items.
        Working...