Re: 50" Philips 50PFP5332D/37 no picture, has sound
X-main/Z-sustain.
X-main/Z-sustain.
-
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search. -
Re: 50" Philips 50PFP5332D/37 no picture, has sound
Great thanks. Just ordered one for $50. Will let you know how it goes.Comment
-
Re: 50" Philips 50PFP5332D/37 no picture, has sound
i am new entry in this forum,i am an electronic engg doing my own shop of repairing lcd,led,plasma and micro wave owens......please help me finding fault in hitachi plasma tv with no pic but having sound .Comment
-
Re: 50" Philips 50PFP5332D/37 no picture, has sound
You need to start a new thread, provide model number and supply images of the chassis. Right now your question is equivalent to asking "My car won't start. It's a Ford. Please help me fix it."Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: 50" Philips 50PFP5332D/37 no picture, has sound
I replaced x main board and picture/ sound came on and worked great for about 2 min before going very dark. Now will not power on at all. Do I need new power supply?Last edited by Matteo88; 09-22-2013, 10:39 AM.Comment
-
Re: 50" Philips 50PFP5332D/37 no picture, has sound
Guys any help!? X- Main / Z - sustain replaced, worked approx 2 min. Picture faded, tried restart. Now will not come on at all.
Comment
-
Re: 50" Philips 50PFP5332D/37 no picture, has sound
guys i also have this issue, i used tom66 link to manuals an found them quite useful.. Although i do have questions bout this set and i am a newbie so i dont know how to post a question or address a member.I found that i had a burned leg on the ysus @ u5800. this is a mosfet i beleive 6 pin mr4270 is the part number on the part. does anyone have any help for me? can i just replace this part or should i check further to see what caused this to burn the leg off? I have heat at the top portion of the ysus but the lower half has no heat at the heat sink.. please help..I also need to know how to check my messages for replys?Comment
-
Hi, I have a Samsung UE50TU with:
- sound and backlight, but no picture
- when it arrived, it had a picture for a few seconds
- it keeps rebooting
- without ribbon cable between the two panel boards, it does not reboot but I have no picture
- without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
- when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.
- without cable between mainboard and lcd panel and with a jumpered... -
I have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.
I ordered a supposedly ‘new' Tcon board this time, and... -
Hi all
I was just given a Samsung TV with the issue. I read various threads and videos and attempted the ribbon tape method to gain an image, but no luck.
Symptom:
No picture no sound.
When I plug in the power cord, Backlight LED turns on for a half second and then turns off. The red LED next to the power button located center bottom flashes 2 or 3 times. When the power button is pressed after, it does the same thing.
No sound at all.
What I tried:
1. I tried unplugging the left or right ribbon... -
Hello,
I've got a really strange issue with the speakers on my Philips 43PUS7506/12. It makes this awful loud buzzing now. It happened after it was attempted to be wall mounted - I think the back got squeezed and something broke.
I thought maybe the speakers got damaged, so I replaced them - no dice.- Using the internal speakers, it always happens.
- Using the headphone jack, it never happens.
- Using the digital/optical out with a soundbar - it happens after about 2h/movie runtime - it's never as drastic, it just pops in and out, but I didn't want it to damage the sound bar
-
so i took out one of my spare gigabyte ep35-ds3r mobos from storage for use to do some cpu, ram and video card testing of stuff i bought from ebay and got for free from momaka. he bought 50 e8400 cpus for cheap from ebay some years ago and i decided to help him relieve him of some of his supply since he had waaaay too many!!
what did we say about hoarding too much stuff and depriving others of them?! *cough* socialism *cough* lol! 
i had to blow some dust off the board and heatsinks with the datavac as i didnt clean it up before putting it in storage. after finishing...
Comment