Hi guys i have a sony kdf 55wf655 tv and the bulb went out so i bought a new one and stuck it in and the unit is still not turning out. I took it apart and the power supply looks ok and every other logic board i could find. Any tips or help would be greatly appreciated
-
-
Re: sony kdf- 55wf655
Are there any blinking power lights or lamp lights, anything? I had worked on a couple of sets now where the problem was simply that the door to the lamp was not closed properly. Check this and make sure that it is exactly how it came apart. There is a micro-switch that will keep the set from coming on if the door doesnt close the switch.The strong-minded rise to the challenge of their goals,the weak-minded BECOME HATERS
-
Re: sony kdf- 55wf655
ok i will check that out. but no nothing is blinking or coming on. no lights what so ever. but i can hear a buzz from the power supply.Comment
-
Re: sony kdf- 55wf655
Without ANY lights, check the power supply. The same as any LCD TV you
have to have standby before anything else will work. There are no major issues with the power supply. The power supply is the horizontal board behind the ASU/DSU stand up pair that you see when you take the back off.
First thing I would do is take that lamp back out before I try to turn it on again. See if you get lights then. A "buzz" might be a loaded power line feedback.Comment
-
Re: sony kdf- 55wf655
ok so i took the power supply out and checked everything and it looked ok
i tried turning the unit back on and it flashes green 5 times and red 6 times.Comment
-
Re: sony kdf- 55wf655
Service manual is here.
6 red blinks seems to be the thermal fuse under the lamp.
PlainBillFor a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.
Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.Comment
-
-
Re: sony kdf- 55wf655
OK so i replaced the thermal fuse and it turns on but now i have blue dots all over the screen. any idea what is causing this and how to fix it?Comment
-
Re: sony kdf- 55wf655
ok so i did some research and it looks like they polarizing lens for the blue gets degraded over time due to heat. so i took mine apart and sure enough it looks foggy and discolored. . now im thinking of replacing the lens its self but i have a few questions.
1. do you think this will fix the issue
2.how hard is it to adjust the lens ( took out the others to make sure they wernt messed up as well and might have knocked off the adjustment.)Comment
-
Re: sony kdf- 55wf655
polarizer is not the problem. It's the LCD itself. They can be changed but need alignment after doing so. This can take quite some time and is largely experimental moving of the LCD in small increments while watching the picture.
Is this a TV you came bu or have you owned it since it was new?Comment
-
Re: sony kdf- 55wf655
ok so before i go and buy parts this is the part i took out and looks really bad
https://sites.google.com/site/sonylc...attredirects=0
are you saying the part i need to replace is the lens in there or the pic from above?
https://sites.google.com/site/sonylc...t/SANY0070.jpgComment
-
Re: sony kdf- 55wf655
and to answer your other questions this is a friends tv so i personally havnt owned it but they bought it newComment
-
Re: sony kdf- 55wf655
will it cost them money? or is there a recall or somethingComment
-
I replaced the bulb only on my Toshiba DLP The bulb is a TB-25. This is the first time I've done a bulb only replacement. Supposedly there is a timer module that needs to be re-calibrated or reset. I don't know where the module is located. I see some vendors selling the bulb with the housing stating module included which leads me to think the module is located inside the enclosure the bulb mounts in, but I didn't see it. Maybe it's inside the plug attached to the bulb?
Anyway - I am seeking information on how to reset this so called module so that the lamp will operate. Apparently... -
I have a 2019 75" x950g, and while playing a movie, the screen suddenly went dark in a weird way, where it faded towards one corner into being fully black. Now the TV turns on, and the backlight comes on, but there is nothing displayed except black. Sound still comes through the TV speakers, and i have tried doing a hard reset using the volume - and power buttons while plugging the display back in, but it did not fix it. I can confirm that pressing buttons on my remote is still doing "something" because I'm hearing sound still, even though the screen is black.
Does... -
Hi,
I have a LUMIMAN Smart Bulb that suddenly stopped lighting one day. The bulb is still detected in the app, but won't light. I've probed around and nothing seems to look off with any of the diodes, caps or resistors. The Bluetooth/Wi-Fi module seems to be working as it's still detected in the app. I even tried deleting and re-pairing the bulb (it didn't light, but I was still able to follow the pairing instructions), it re-paired fine, but still no light.
In diode mode, the LEDs all light up when probed so I'm guessing this means the LEDs themselves are OK. I was expecting... -
Buenas mi nombre es carlos me uni al foro porque estoy buscando el schematic de una sony vaio pcg-41217u otras formas de escribirlo son 1p-0117j01-a012 mbx-237 numero de placa revision 1.2 o Sony VPCSB (MBX-237), en fin me gustaria y ayudaria un monton si alguien me puede dar dichi svhematic para hacer las mediciones de una laptop de la mencionada anteriormente(Sony VAIO PCG-41217U) con el fin de repararla dejo de funcionar solo prende el led de la bateria al pulsar el boton de power el disco empiesa a hacer ruido de actividad pero los leds del frontas no reflejan acividad y no enciende la pantalla.... -
Hi,
I've got a Sony KD-49XE8396 TV that will switch on show the Sony logo then the Android logo and then switches off, and then blinks red 6 times.
I've read that this is the backlight, and during it showing the initial logos I can see that the left side is definitely darker.
I've also read that you can bypass the error to get it working but I'd prefer to fix it if at all possible. Any help would be appreciated.
Many Thanks in advance.
Comment