Hello I was wondering if someone with more knowledge then I would be so kind as to help me with a project i'm playing around with.
I have multiple 18650 Li-Ion that I use for my vaporizer and I thought it would be a fun project to build a multi charger for them. I got these from other 2 pack bundles that have the smart chip on them and a 3 prong plug. I would like to build a board that i can plug these 3 prong plugs on to and wire that to a battery harness so i can charge multiple sets at a time.
I dont know where to start but here are some specs on the batteries...
testas86
Senior Member
Last Activity: 03-19-2015, 11:53 AM
Joined: 05-18-2010
Location:
-
building a multi charger.
-
Re: Samsung LNT4071 FX/XAA no picture with lines
Hello i have a similar issue with my tv the weird thing is that one side looks ok and the other side is the messed up one. is it still the panel or is that a tcon board issue?... -
Re: multimeter help
its a 1 amp output sorry i though i included that photo and yes i had the meter set to 10 amps unfused. so if thats not how you test the output amps of a PSU then how do you test them? i have tons of PSU that i need to test to make sure they are putting out what they rated at before i can connect them to any devices....Last edited by testas86; 07-09-2014, 03:49 PM.Leave a comment:
-
Re: multimeter help
on the site all i get is this which doesnt help
[url]http://www.idealindustries.com/prodDetail.do?prodId=33-892[/url]Re: multimeter help<br /> <br /> o...d=33-892[/url]Leave a comment:
-
multimeter help
hey i got 2 of these multimeters and the voltage reads find but i cant get anything with the amps, it flashes for a second saying around 1 amp then goes to 0 am i just using it wrong? any help would be great thanks!... -
Re: what is this and how do i find a replacement?
ok thanks. im trying to order the 14 ohm one but its a minimum or 200... are there any where i can just buy one? sorry i dont know how to look these up. I am also thankful for your assistance.Leave a comment:
-
Re: what is this and how do i find a replacement?
which would be better to use the 10 or the 14 ohm?Leave a comment:
-
Re: what is this and how do i find a replacement?
everything else looks good and the fuse is good. do they sell these on digikey?Leave a comment:
-
Re: what is this and how do i find a replacement?
It's from the motor on a clothes turn wheel like at a dry cleaner. I'll try to check the resistance tomorrow but I can't test anything inline as its from my friends dry cleaning business so he old have to shit down while we put it in. Thanks for the help!Leave a comment:
-
Re: what is this and how do i find a replacement?
here are the pictures you requested...Leave a comment:
-
Re: what is this and how do i find a replacement?
replay for subscribeLeave a comment:
-
what is this and how do i find a replacement?
im trying to fix this board and noticed this...... -
Re: philips plasma tv display off color and red spots
is there anything in particular that i should be looking for on those boards. i took them all out and re-soldered the joints to make sure it wasn't crap solder.Leave a comment:
-
Re: philips plasma tv display off color and red spots
ill look in to those boards. i was able to fix the problem by adjusting the little plastic screws on the power supply and the logic boards but im assuming thats only a temporary fix.Leave a comment:
-
philips plasma tv display off color and red spots
i have a plasma philips tv that i just got to show video and to my disappointment the screens color is off and there are red spots all over. also when i turn it one its all black and slowly fades in to the video. i was wondering if anyone had an idea of what could be the issue and if so what i can do to fix it. pictures will be linked so you can see what im talking about.
thanks... -
hp PL5060N no video
The unit will power on and the light goes from blue to amber but im not sure whats wrong with it. i did some research and it seems like most repairs needed are to the zsus board. Ive bought one but before i put it in i would like to know if there is anything else i should test before i but that in so i do not damage it.Last edited by testas86; 01-29-2012, 01:45 PM. -
Re: viewsonic vx2835wm
so i took it all apart again and resoldered all the transformers on the power supply as well just in case. i also disconnected the tcon board from the tv and turned it on and i got nothing at all. so i was wondering if that means it is in fact the inverter board cus shouldnt i atleast get a flash on the screen showing that the bulbs are turned on even if then tcon board isnt plugged in or working?
please any help would be greatly appreciated.Leave a comment:
-
Re: viewsonic vx2835wm
yes ive resoldered every transformers jointLeave a comment:
-
viewsonic vx2835wm
the unit turns on and the screens backlight seems to come on but no actual video its just lit up black. ive taken it apart and saw some blown caps on the video board and replaced the 1 blown cap and all surrounding caps. ive also tried each transformer by its self and every time the screen does the same thing. i tested the voltages of the transformer and one of them seems a little weird so i wanted to replace it. if anyone could help me trouble shoot more on this tv and help me find a transformer that would be great! thanks
transformer number seems to be
2874015000... -
Re: sony vgn-nr498e no power
do you know where i can buy these at?Leave a comment:
No activity results to display
Leave a comment: