Powerspec V30DMBT...

Collapse
X
Collapse
+ More Options
Posts
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • eppidrummer
    Senior Member
    • Jan 2011
    • 65
    #1

    Powerspec V30DMBT...

    Ok, now I am clueless. I have a powerspec V30DMBT that someone has given to me. Originally the tv has no pic in tv mode and dvd mode. The screen is not completely black and you can hear the sound from the cable tv/dvd. Almost like its not on the right channel. Changing the channel turns the screen blue as if no input signal. I disassembled the tv and found 4 swollen caps in what looks to be the power supply. I ordered new caps from here, replaced them and still same thing. I have tried every combo tv setting with no luck. I have recapped a total of 8 pc mb with 100% success so I am sure that my cap job on this is good.
    Open for ideas?
    Thanks again for this great place.
    Tags: None
    • retiredcaps
      Badcaps Legend
      • Apr 2010
      • 9271
      #2
      Re: Powerspec V30DMBT...

      Clear focused pics of all your boards + an overall view using manage attachments would help.
      --- begin sig file ---

      If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

      We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

      Please do not post inline and offsite as they slow down the loading of pages.

      --- end sig file ---

        Comment

        • katherine.judy
          New Member
          • Jul 2011
          • 1
          #3
          Re: Powerspec V30DMBT...

          I have a POWERSPEC V30DMBT, for sale, it has a cracked screen. But everything else works on it. Please email me mama2logan1012 and that is at yahoo.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Ryan.man
              Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
              by Ryan.man
              Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

              My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

              This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
              02-04-2025, 12:23 PM
            • smic717394
              iphone XS turns off when press on screen.
              by smic717394
              Hi,

              I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
              07-25-2024, 10:16 AM
            • eccerr0r
              old X58 triple channel board... memtest86 memory speed?
              by eccerr0r
              Anyone run memory speed tests with an old X58-based triple channel 1st gen or any other >2 channel board? The one I have is a Gigabyte I think.

              Anyway I had four 4GB DDR3-1333 modules in the 6 memory slots and got around 11GB/sec memory speeds assuming that it went dual channel since it didn't have enough modules for triple channel. Now I stuck in two more 4GB modules, but they are DDR3-1600. I'm still getting 11GB/sec speeds according to memtest86...

              Just wondering, anyone do memory speed analysis on these triple (and higher) channel memory boards? Are there any...
              06-28-2025, 09:06 AM
            • Chrissygizmo
              Samsung UE55JU6800K half screen dark
              by Chrissygizmo
              Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
              I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same...
              02-10-2025, 12:33 AM
            • spice_disc
              Vizio TV M50-C1 reboot cycle and static on screen
              by spice_disc
              I'm currently trying to diagnose and fix my Vizio TV (Model M50-C1). I've tried a number of different basic solutions, but I'm trying to determine if my issue is currently a failing panel, T-Con board, or main board (or something else entirely) and whether or not it is worth my time to fix it. Details of the issue and what I've tried are below as well as why I think it is either a bad panel, T-Con board, or main board.

              The Issue: The TV will be on and working fine but after the TV is on for ~5-10 minutes the screen will freeze (with sound continuing) until the TV reboots itself. While...
              1 Photo
              09-08-2024, 02:37 PM
            • Loading...
            • No more items.
            Working...