Hisense calibration

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jaco2d
    New Member
    • Oct 2022
    • 7
    • scotland
    #1

    Hisense calibration

    Hi i recently purchased a Hisense u7hqtuk TV, there is 2 different version of this set, the UK, Europe one and the America one, i have the UK and Europe version.
    I have searched for calibration for the TV but i can only find it for the America one which has 1000 nits, the version i have has got 600 nits so the calibration settings will not work.
    Has anyone got this TV and managed to get good picture setting for it or can anyone find a link to the calibration settings?
    The picture is good enough but if possible i would like to get the best possible picture settings for the TV.
    Tags: None
    • etbmikenel
      Member
      • Dec 2018
      • 17
      • South Africa
      #2
      Re: Hisense calibration

      The chassis number is MT9618 - https://we.tl/t-ZZp99wCh4I link to service manual

        Comment

        Previous template Next

        Related Topics

        Collapse
        • i440bx
          Elitebook 820 G3 engineering example: CMOS settings lost despite new cell
          by i440bx
          Hey there,

          I got a HP Elitebook 820 G3 Engineering Sample Laptop and I want to use it. Besides the difficult things at the ES-BIOS I have a big problem by saving the main BIOS settings.

          The laptop does not have a big battery because it was dead, but I already plugged in a new CMOS battery.

          It takes about 5min without power and the BIOS settings are lost. Unfortunatly I dont understand why the BIOS settings are only saved with power connected and this is the reason why I registered here.

          As written above, I plugged in a new CMOS cell and checked...
          3 Photos
          08-19-2024, 02:28 PM
        • throwaway327
          Asus ROG Ally X -RC72LA - changed hidden bios settings with 'Smokeless-UMAF', won't get past boot logo
          by throwaway327
          ASUS ROG Ally X - (Handheld Gaming PC)
          Model No: RC72LA
          Serial No: SBNVKD001014459

          Hi all, I've spent the past week digging through the forums and guides to try correct my foolish mistake of changing hidden settings while tinkering around, and to be honest my heads overloaded so I'm hoping you'll be able to help.

          I used a tool called 'Smokeless-UMAF' to access usually hidden settings in the bios. I tweaked one or two 'safe' things but made the mistake of tweaking a lot of settings under 'USB/Thunderbolt Configurations' when I didn't know what they did. For...
          06-18-2025, 05:52 PM
        • ShahZaib Ghumman
          Can I Swap Screens Between Two Hisense 75” QLED TVs?
          by ShahZaib Ghumman
          Hey folks,

          I'm not a professional, but I do have a decent amount of knowledge when it comes to electronic repairs.

          A friend of mine recently bought a brand new Hisense 75” 4K QLED Smart TV (75E7NQTUK) but unfortunately, he cracked the screen just a few days later. Luckily, he had insurance and got a replacement right away but weirdly enough, the insurance company never asked for the broken unit back.

          So, I took it off his hands and figured I'd try to repair it myself rather than see it go to waste. I've been searching for a replacement screen but can't...
          1 Photo
          03-25-2025, 10:59 PM
        • nono34
          Hisense stuck in Colors cycle like test pattern.
          by nono34
          Hello,

          I accidentally changed the project ID in the service menu of my Vidaa Hisense 100U7KQ TV. When I turn on the TV, the screen displays an RGB color cycle (test mode???). I contacted Hisense, and they sent me a usb_MTK_9618.EU.bin file, but it doesn't work. I can see that the USB drive is being read, and it flashes for about 10 minutes (the screen remains in the color cycle during the firmware reading), then the TV turns off and restarts, but still in the color cycle mode.

          I want to mention that the 4GB USB is formatted in FAT32 MBR. I've also renamed the file to...
          10-24-2024, 04:31 PM
        • DoubleBogey817
          HISENSE 65H6510G (13 AUG 2020) - POWER ISSUES
          by DoubleBogey817
          HISENSE 65H6510G (13 AUGUST 2020)

          When powered on, initial splash screen (HISENSE ANDROID TV) displays for a few seconds then power shuts off. Tried updating firmware with USB flash drive (can't find 4GB drive but did format larger drive in FAT32) with no luck. Flash drive would be accessed but would never get to the update process. I have ordered a board (RSAG7.820.7911/ROH, PART# 242585) from eBay which will arrive in a few days. Does anyone have any input of whether I am chasing down the right trail or should I be trying something else? I appreciate your time and wish to say thank...
          02-16-2024, 10:58 PM
        • Loading...
        • No more items.
        Working...