I just got an LG MU-42PM11 as-is from ebay for $46. The original problem was that it wouldn't power on, which was fixed by installing a new fuse into the Ysus board. The TV powers on, but the pixels are slow to fire, and colors are very bad.
I already measured the voltage off of the VS and VA pins and it matches the voltage on the panel. I'm going to measure VSETUP and VSETDN, but I don't think they're the problem.
I'm attaching a video & a picture, I want to know if I need a new Y-sus board or if the panel is bad. The TV will not show dark colors, and light colors will blend together. The TV is 5 years old, after all.
Also, I need a way to check panel hours, the service menu (code 8741) doesn't tell me anything about the panel.
Here's the video: http://www.youtube.com/watch?v=bytRzUo6dJI
I already measured the voltage off of the VS and VA pins and it matches the voltage on the panel. I'm going to measure VSETUP and VSETDN, but I don't think they're the problem.
I'm attaching a video & a picture, I want to know if I need a new Y-sus board or if the panel is bad. The TV will not show dark colors, and light colors will blend together. The TV is 5 years old, after all.
Also, I need a way to check panel hours, the service menu (code 8741) doesn't tell me anything about the panel.
Here's the video: http://www.youtube.com/watch?v=bytRzUo6dJI
Comment