le40b530w colour problem and double letters

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Xristakis795
    Senior Member
    • Mar 2021
    • 162
    • Greece
    #1

    le40b530w colour problem and double letters

    hi to all on the above model i have solarized picture and double letters
    it uses tcon board FHD60C4LV1.1
    i think as about as the double letters maby the problem is the same display
    but as about as the colours it likes as solarized picture
    i look to find the schematic for the above tcon card without success
    has anybody measure the voltages from the above tcon card to advice me how can i measure the gamma voltages ?
    thanks on advance
    Tags: None
    • petehall347
      Badcaps Legend
      • Jan 2015
      • 4426
      • United Kingdom
      #2
      Re: le40b530w colour problem and double letters

      see what is getting hot and then freeze it and see what happens

        Comment

        • Xristakis795
          Senior Member
          • Mar 2021
          • 162
          • Greece
          #3
          Re: le40b530w colour problem and double letters

          its happen from the start
          when i turn on the tv

            Comment

            Previous template Next

            Related Topics

            Collapse
            • jason123
              Hisense 65R6E3 double-image / horizontal strips - TCON?
              by jason123
              Hello all. 3 years back, with your help, I replaced the LEDs on this TV. It's been working great. Yesterday, I turned it on (garage TV), and it has blurred horiz / vert lines as you see in photos. Definitely no physical hit or damage. Top 1/6th of the screen is perfect. Could it be main / TCON board? No tabs to cut on this model. Thank you...
              07-19-2025, 08:07 AM
            • THXFX
              samsung un43nu7100 BN94-13191C/BN41-02635A boot loop problem even with tcon jumper
              by THXFX
              Hi I need help with a Samsung un43nu7100 BN94-13191C/BN41-02635A with boot loop problem even with tcon jumper.
              I've already try tape method and same happen, if I disconnect both flex from mainboard to panel tv boots normal even I hear Samsung sound.
              When I solder jumper to make t-con work with or without panel or panel cables connected it still reboot or power cycling.
              What I noticed is that there's no voltage in VHG, HAVDD, PANEL_3.3V, AVDD_17V or 12v near dc-dc chip.
              I check capacitors and diodes and didn't find any short IN MAINBOARD.
              Measured all power supply...
              03-20-2024, 03:21 AM
            • theone111
              Problem with LG Plasma 60PM6700 - Random power downs
              by theone111
              I have an LG Plasma TV 60PM6700 for the past ~12 years.

              In the last ~3-4 months I have been having some issues.
              1. Problem: It started with random picture disappearing (sound still worked).
                Frequency: Happened about once a week.
                Solution: Had to turn off TV wait a few seconds before turning it on again.
              2. Problem: Then it got worse and the TV started to shut down and when turning on the no picture just sound.
                Frequency: Happened about once a week.
                Solution: Had to turn off TV wait about 10-20 seconds and turn it on again to solve.
              3. Problem: TV shuts down
              ...
              1 Photo
              07-22-2024, 10:36 AM
            • x_orange90_x
              TCL 50S535 bad tcon or panel issue?
              by x_orange90_x
              Just bought this for 10 bucks yesterday hoping to fix it. The guy said water dropped inside from a dehumidifier hose and it started showing black and white vertical bars then went blank. When I got it home and turned it on it came on fine and displayed correctly but I was noticing faint vertical bars in the image. After a little bit I turned it off and back on and it was a black screen again. I opened it up to check for water damage and corrosion but didn't find anything of the sort. I cleaned the ribbons anyway and reconnected them but still got a blank screen. If I disconnect the right side...
              03-29-2025, 11:02 PM
            • advant
              Driving a Sharp TCON/panel with a universal main board
              by advant
              This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

              I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
              02-03-2020, 12:25 AM
            • Loading...
            • No more items.
            Working...