Samsung BN44-00775A no Power No STB or Power lights.Help needed

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • TKF
    Member
    • Oct 2013
    • 31
    • US

    #1

    Samsung BN44-00775A no Power No STB or Power lights.Help needed

    After a lot or reading and searching I suspected PB Power Board#BN44-00775A but after voltage tests I'm not sure what they indicate or point to.
    1st I unplugged MB and left only BLs plugged in to see if I got light No BLs come on. So I suspected Black lights but then tested BLs with BL tester they came on. I suspect a short somewhere I started testing at the STB pin 8v/on13v I get 12.80v note no stb lights on
    I noticed with only MB plugged in MB showed signs on life saw red light on not sure from where and it started warming up.
    Thanks for any help or ideas or testing suggestions to follow
  • TKF
    Member
    • Oct 2013
    • 31
    • US

    #2
    Re: Samsung BN44-00775A no Power No STB or Power lights.Help needed

    Updating my 1st post I was unable to edit it got timed out

    Samsung TV Model- UN60H6203AFXZA. No STB or Power lights
    Power Board - L60H1 EHS BN44-00775A - Main Board- BN97-08810A 0013

    Things I've tried so far, I took voltages with everything connected I got only 1.5v at STB/On pin,
    I disconnected all connections except Power Board and got voltages,
    Then checked voltages with different combinations of boards connected and disconnected.
    IdentifyBox CNM803-pins 1,3,5,7,-A13V,9-Gnd
    pins2,UD-4,PWM-BLU-6,PS-ON 8,10,GND Voltages Readings below

    -Power Board only connected
    pins 1,3,5,7,12.82v,9-0
    2,UD-2.30v
    4,PWM-BLU-3.30
    6, PS-ON-3.90
    9,-gnd

    -Power Board &Main Board -
    pins 1,3,5,7,-2.76v, 9-0
    2,UD- 3.30v
    4,PWM-BLU -0.75v
    6,PS-ON -3.33 Pins
    8 &10 gnd
    When PB & MB when 1st plugged in, STB light flashed 6 times & Main Board showed signs of life and started to warm

    -With Only Back light & Power Board
    pins 1,3,5,7,-1.63v, 9-0
    2,UD, 0
    4,PWM-BLU 0
    6,PS-ON 0 Pins
    8 &10-gnd
    As in OP With Only Back light & Power Board connected Didn't get any Back lights,So then tested BLs with BL tester And Back light came on.

    Any help or troubleshooting ideas or testing to try next would be greatly appreciated

    Comment

    • R_J
      Badcaps Legend
      • Jun 2012
      • 9535
      • Canada

      #3
      Re: Samsung BN44-00775A no Power No STB or Power lights.Help needed

      Monitor the voltage on BB9003, next to CNL802, when you first turn on the tv, what is this voltage? it should come up to around 325vdc, I suspect you have a bad led in the backlight string.
      Last edited by R_J; 06-27-2023, 04:31 PM.

      Comment

      • TKF
        Member
        • Oct 2013
        • 31
        • US

        #4
        Re: Samsung BN44-00775A no Power No STB or Power lights.Help needed

        Thanks for help R J I have to turn tv on with plug Not sure if your refiring to pin 1 on CNL802 or the inductor in front of CNL802 the voltage on pin1&2 with BL not connected 419v with MB connected it 452v on pins 1&2 all other pins 0 and with BL plugged in 0v
        Last edited by TKF; 06-27-2023, 05:38 PM. Reason: adding info

        Comment

        • R_J
          Badcaps Legend
          • Jun 2012
          • 9535
          • Canada

          #5
          Re: Samsung BN44-00775A no Power No STB or Power lights.Help needed

          You have an open backlight string, that is why the voltage is high (419~452v) and it then goes into over voltage protection. It only take one led to fail and those backlight testers do not check the backlights at high current, only at about 10ma

          Comment

          • TKF
            Member
            • Oct 2013
            • 31
            • US

            #6
            Re: Samsung BN44-00775A no Power No STB or Power lights.Help needed

            R J I was afraid it was a BL issue I remember reading somewhere about the protection in my testing Voltage i thought it might be MB do to the low reading on
            Pin 4 PWM-BLU -0.75v with MB connected I will report back when i get it apart and repaired
            Thanks again for your expertise

            Comment

            • TKF
              Member
              • Oct 2013
              • 31
              • US

              #7
              Re: Samsung BN44-00775A no Power No STB or Power lights.Help needed

              Originally posted by R_J
              You have an open backlight string, that is why the voltage is high (419~452v) and it then goes into over voltage protection. It only take one led to fail and those backlight testers do not check the backlights at high current, only at about 10ma
              Update: Hope this info. can help others - R J you hit it right on the head the top string was shorted all leds out, all but 2 strings had bunt Leds and those 2 strings were all good. Replaced all led strings, and everything worked got STB light and power lights and tv working again just to see a new Big Problem the screen had horizonal lines on the upper part and other parts had color issue so started checking the I reseated ribbins on the t con and Driver board on bottom the driver ics (i think there called)the tabs on the side on the screen, 1 had a little tear and 1 at the top was missing. not sure if that was on pupose on not. when searching saw a videos of someone replacing ic tabs, not sure if the screen is Toste or can be repaired Has anyone had any luck repairing screens with these issue?
              Thanks again R J and for any suggestions on the new issue.

              Comment

              Related Topics

              Collapse

              • PantherDave
                Microsoft Surface Pro (5th gen) model 1796 - no power
                by PantherDave
                Hi all!

                I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅

                I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
                https://www.badcaps.net/forum/troubl...-hardware-devi...
                05-29-2024, 02:01 PM
              • ipatch
                troubleshooting microsoft surface pro 4 no power no led charge light
                by ipatch
                hello, �� i have been sitting on some microsoft surface pro 4 tablets for a while now. i was originally tasked with replacing the battery in one of the tablets, and ended breaking the screen and logic board in the process. decided to buy another tablet with the same specs. got that screen off successfully of the second tablet. the logic board appeared good, but i guess i shorted something out in the installation process of the logic which i've read is a common issue if there is no barrier between the logic board and battery pins. all that said, i ate costs of the repair and have...
                10-05-2023, 11:59 AM
              • russpall
                LG 39ln540v - red light flashes twice, no power to LED driver?
                by russpall
                Hi there,

                I've got a 39" LG 39LN540V that's just spontaneously stopped working! The symptoms are - when I plug it in, the red light will flash on twice, then go out, there's no visible picture, and I couldn't see anything using a torch on the panel either. If I press the power button (either remote or on TV), the red light comes on continuously. If I press power again, the red light flashes twice.

                The TV is using a power board EAX64905301. I've attached a diagram of the power output, I've tested the voltages with a multimeter and I'm getting the following:
                ...
                08-27-2024, 01:07 PM
              • hill01
                Samsung UE75MU7009TXZG Endless Power Cycle
                by hill01
                Samsung UE75MU7009TXZG Endless Power Cycle

                Hi everyone and thanks in advance for any help I might get here

                My Samsung TV is about 4 years old. The exact model number is UE75MU7009TXZG.
                About half a year ago I started seeing occasional green frames pop up while watching movies. I mean literally green frames. Not the image turning green, but the entire screen turning green for a split second. This happened maybe once or twice during a 2 hour movie. So no big deal, but clearly something was not quite right.

                Since a few days, the TV won't turn...
                11-17-2021, 02:52 PM
              • JRyan
                Samsung TV UN60J620DAF blinking power light
                by JRyan
                Saved this TV from the trash but it will not power on the red power indicator light blinks 6 times with no display. I've attached pics of the power board(1st pic) and mainboard(2nd pic). I don't see any blown caps on pb like I expected so what do y'all think is the issue?...
                09-03-2023, 07:56 PM
              • Loading...
              • No more items.
              Working...