Anyone with experience repairing a bad MAIN board?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • edugimeno
    Badcaps Veteran
    • May 2017
    • 581
    • Spain

    #61
    Re: Anyone with experience repairing a bad MAIN board?

    Exactly, the LEDs emit a naturally blue light, but they have been coated with a thin layer of yellow phosphor that, combined with the blue color, make the pure (expected) white.
    The heat and years end up peeling the yellow phosphor leaving a blue light underneath. I have removed the lens of several of these LEDS and I was able to see the remains of yellow phosphor around the LED, all cracked and wrinkled
    Like I said before I have repaired some dozen of LG Tv's, but also some were Samsung and TD Systems, but maybe just one of each of these

    Comment

    • ruckusman
      Member
      • Jan 2009
      • 26

      #62
      Re: Anyone with experience repairing a bad MAIN board?

      This is a great thread seeing it come to a successful conclusion with such a small part only needing to be replaced.
      Good work!

      Comment

      • edugimeno
        Badcaps Veteran
        • May 2017
        • 581
        • Spain

        #63
        Re: Anyone with experience repairing a bad MAIN board?

        Originally posted by ruckusman
        This is a great thread seeing it come to a successful conclusion with such a small part only needing to be replaced.
        Good work!
        I would have given up if I hadn't all the ideas and suggestions from everyone who posted here!

        Comment

        • ruckusman
          Member
          • Jan 2009
          • 26

          #64
          Re: Anyone with experience repairing a bad MAIN board?

          It's an incredibly helpful community, nothing worse than running out of ideas on what to check next.

          A mighty fine effort by all concerned and I love your perseverance - inspirational, that's how these faults get solved and the knowledge base grows.

          Comment

          Related Topics

          Collapse

          • Dani_2024
            Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
            by Dani_2024
            Hi and thanks in advance for any input you might provide!
            I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
            Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

            Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
            10-28-2024, 05:06 PM
          • ygorsan
            LG 55NANO77SRA TV – Menu scrolling by itself even after removing button board (Main Board EBU66792103)
            by ygorsan
            Hi everyone,




            I’m looking for help with a persistent issue on an LG TV model 55NANO77SRA, which uses the main board EBU66792103 (also used in LG UQ80 and NANO75/NANO80 series).







            🧩 Problem Summary:
            • The TV keeps scrolling through the menu or selecting items by itself.
            • I removed the physical button board (the entire panel with power and volume buttons) and also disconnected the flat cable (CN202) from the main board.
            • The remote control is not in use (batteries removed), and the TV still shows the same behavior.
            • I
            ...
            07-28-2025, 08:34 AM
          • JDC
            (SOLVED) - ONN 100012588 No Power, Then Rebooting After Main Board Change
            by JDC
            ONN 100012588
            Issue: No Power, Then Rebooting After Main Board Change

            Short answer: replace main board and power board
            Technical answer: replace main board and Q306 & Q307 on power board.

            Long answer:

            TV wouldn't turn on. Power switch was fine which means the main board isn't processing the power on signal. Replaced main board. TV turns on now but randomly reboots. Bad main board? EEPROM? Tried to pull main board and got a shock touching the corner of the board. That's weird. C334 (450V 10uf) capacitor is still holding a high charge....
            07-15-2022, 07:39 AM
          • m1ch43lzm
            HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
            by m1ch43lzm
            Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
            Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
            05-12-2025, 08:37 PM
          • cheeky2
            Is it possible to upgrade from a Vestel 17MB97 main board to a 17MB110 Main board?
            by cheeky2
            I suppose the real question is whether the existing pinouts from ether a 17IPS71 psu are cross compatible with a 17IPS12 psu? If they are then the exchange of the main boards should have no issues providing the screen is compatible with both main boards. Obviously you can change the screen configurations easily enough (providing you have the correct files) for the main board. Why may you ask would I do this? Well a lot of the smart features are no longer working on a Hitachi 48HBT62U main board I wish to give it a new lease of life!
            Obviously the same LVDS connector for the screen connection...
            05-25-2024, 03:27 AM
          • Loading...
          • No more items.
          Working...