Samsung 32in LCD LA32A650A1FXXY

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • michael1973
    New Member
    • Oct 2020
    • 6
    • Australia
    #1

    Samsung 32in LCD LA32A650A1FXXY

    hi guys, i used the search function and couldn't find anything useful, if you know of something please post a link.

    i have an older samsung 32in Lcd:
    Model: LA32A650A1F
    Model code: LA32A650A1FXXY
    Type: LA32A650
    Power board: BN-4400208A
    Main board: BN94-01767A

    Problem is the Tv takes up to 6 power button led flashes to turn on, if it even turns on at all, the 5v standby voltage is solid the whole time, but when switching on the other voltages 12 and 24etc, they turn on and off (cycling about 1-2seconds) seemingly with the flashing led, when it finally turns on the power board voltages are stable and correct, i've disconnected all the other boards other than the main board and problem persists, i've disconnected everything except mains power and used the 1k resistor across pin 1 and 3 on the power board to power it on and all (5,12,24etc) the voltages are stable straight away.

    Only thing i noticed is if i leave the backlight board connected and manually power the power board with the resistor the backlights don't turn on, it must get a signal from elsewhere.

    I've removed and tested every cap on the power board and back light board, all test good via capacitance meter and esr meter. I have an oscilloscope for testing, but a beginner at that also, Id appreciate any advice.
    Attached Files
    Tags: None
    • nomoresonys
      Badcaps Legend
      • Jan 2013
      • 12206
      • U.S.
      #2
      Re: Samsung 32in LCD LA32A650A1FXXY

      see if one of the pins is labeled blu-on, bl-on, add another resistor there and you should get the backlights on, if working.
      Quit because THIS SITE LETS A ROGUE MEMBER TYPE ANY GARBAGE HE PLEASES AND THE POWERS THAT BE NEVER DO ANYTHING ABOUT IT SO HE NEVER QUITS. THEN YOU GET A PENALTY FOR RESPONDING TO HIS ATTACKS. BEEN GOING ON FOR WAY TOO LONG. DONE SUPPORTING A SITE THAT ALLOWS THIS BS.

        Comment

        • michael1973
          New Member
          • Oct 2020
          • 6
          • Australia
          #3
          Re: Samsung 32in LCD LA32A650A1FXXY

          Thanks for the tip nomoresonys, i'll check it tonight
          Attached Files

            Comment

            • michael1973
              New Member
              • Oct 2020
              • 6
              • Australia
              #4
              Re: Samsung 32in LCD LA32A650A1FXXY

              when i connect b/l and Det5v on the power board the backlight turns on immediately and all voltages appear stable, i have found a tiny cap on the mainboard that's measuring 6ohms on the ESR meter, but having trouble decoding 8B 1 50J, i have recorded some voltages for the the cycling issue starts for tomorrows test, it's not repeatable other than waiting a day. thanks for your help
              Attached Files

                Comment

                • michael1973
                  New Member
                  • Oct 2020
                  • 6
                  • Australia
                  #5
                  Re: Samsung 32in LCD LA32A650A1FXXY

                  update: i took the 1uf 50v cap off the board and measured in spec, put it back on.

                  i did notice that the on/off pin on the power board which is the same pin i bridge from 5v with the 1k resistor, it measures 3.3v when the tv is on, but cycles when the tv is in the faulty cycling mode from almost zero to 3v (this connector goes to the main board), kind of leads me to
                  think the main board is faulty here, what’s your opinion?
                  Last edited by michael1973; 02-13-2023, 04:22 AM.

                    Comment

                    • nomoresonys
                      Badcaps Legend
                      • Jan 2013
                      • 12206
                      • U.S.
                      #6
                      Re: Samsung 32in LCD LA32A650A1FXXY

                      yes, I think you are correct, sure seems to be the mainboard at fault.
                      Quit because THIS SITE LETS A ROGUE MEMBER TYPE ANY GARBAGE HE PLEASES AND THE POWERS THAT BE NEVER DO ANYTHING ABOUT IT SO HE NEVER QUITS. THEN YOU GET A PENALTY FOR RESPONDING TO HIS ATTACKS. BEEN GOING ON FOR WAY TOO LONG. DONE SUPPORTING A SITE THAT ALLOWS THIS BS.

                        Comment

                        • michael1973
                          New Member
                          • Oct 2020
                          • 6
                          • Australia
                          #7
                          Re: Samsung 32in LCD LA32A650A1FXXY

                          i was able to get the same tv and swapping boards im able to confirm it was the main board at fault, im looking for a thermal camera to try and narrow the specific fault on the board further

                            Comment

                            • nomoresonys
                              Badcaps Legend
                              • Jan 2013
                              • 12206
                              • U.S.
                              #8
                              Re: Samsung 32in LCD LA32A650A1FXXY

                              Ok, now that you have a working board you can compare some voltages between the two boards, should make it a lot easier to sort out.
                              Quit because THIS SITE LETS A ROGUE MEMBER TYPE ANY GARBAGE HE PLEASES AND THE POWERS THAT BE NEVER DO ANYTHING ABOUT IT SO HE NEVER QUITS. THEN YOU GET A PENALTY FOR RESPONDING TO HIS ATTACKS. BEEN GOING ON FOR WAY TOO LONG. DONE SUPPORTING A SITE THAT ALLOWS THIS BS.

                                Comment

                                Previous template Next

                                Related Topics

                                Collapse
                                • Tynan Dill
                                  Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                                  by Tynan Dill
                                  I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                                  Upon bringing it home and plugging it up, it showed a standby light.

                                  I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                                  The screen seems to blackout and stay black, but with a flashlight I can see the display.

                                  With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                                  Assuming...
                                  ORIGINAL POWER SUPPLY BOARD
                                  7 Photos
                                  11-22-2024, 01:46 PM
                                • Dani_2024
                                  Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
                                  by Dani_2024
                                  Hi and thanks in advance for any input you might provide!
                                  I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
                                  Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

                                  Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
                                  5 Photos
                                  10-28-2024, 05:06 PM
                                • repair-it
                                  Need advice testing a samsung power supply board with scope
                                  by repair-it
                                  I am attempting to test a samsung power supply board to verify the pfc ic is working. I am powering up the board with my isolation transformer. The board turns on fine but when I attempt to connect the ground for the scope probe, it trips out the isolator. I was taught not to 'float my scope' so I am wondering if I should test without connecting the ground lead or would that be asking for trouble? Not sure how else to test, I don't have a portable scope. I could plug direct to mains power but that would bypass the safety factor.
                                  07-12-2025, 11:00 AM
                                • sam_sam_sam
                                  Panasonic switching power supply daughter board has two 27uf @ 50 volt capacitors which I do not keep in stock
                                  by sam_sam_sam
                                  I did not have any 27uf @ 50 volt capacitors but one nice thing is that it has enough room for two capacitors in parallel a 22uf and a 4.7uf @ 50 volts 22 plus 4.7 equals 26.7uf which so very close to 27uf I will show some pictures of it sometime tomorrow

                                  This is one of the shit est boards I seen in a very long time and it was the daughter board the traces just lifting off the board I had to use the capacitor leads to repair the the traces and the main board is not any better because I had to repair several traces for the daughter board to the main board

                                  After all of...
                                  07-13-2024, 08:14 PM
                                • JDC
                                  (SOLVED) - ONN 100012588 No Power, Then Rebooting After Main Board Change
                                  by JDC
                                  ONN 100012588
                                  Issue: No Power, Then Rebooting After Main Board Change

                                  Short answer: replace main board and power board
                                  Technical answer: replace main board and Q306 & Q307 on power board.

                                  Long answer:

                                  TV wouldn't turn on. Power switch was fine which means the main board isn't processing the power on signal. Replaced main board. TV turns on now but randomly reboots. Bad main board? EEPROM? Tried to pull main board and got a shock touching the corner of the board. That's weird. C334 (450V 10uf) capacitor is still holding a high charge....
                                  07-15-2022, 07:39 AM
                                • Loading...
                                • No more items.
                                Working...