Philips 43PUS6501/12 EEPROM request.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • unimatrix93
    Badcaps Veteran
    • Oct 2021
    • 339
    • Magyarország

    #1

    Philips 43PUS6501/12 EEPROM request.

    Hello everyone!

    Does anyone have a dump file for this model of TV?
    Motherboard number is: 715G7772-M01-B00-005K
    EEPROM IC: 25L1606E

    My TV is stuck in cycling color mode and I can't get out of it.

    I tried to erase the IC but it didn't help.

    Thanks in advance!
  • lotas
    Badcaps Legend
    • Jan 2016
    • 4474
    • Russia

    #2
    Re: Philips 43PUS6501/12 EEPROM request.

    715G7772-M01-B00-005K (Philips 49PUS6561/12)
    Attached Files

    Comment

    • unimatrix93
      Badcaps Veteran
      • Oct 2021
      • 339
      • Magyarország

      #3
      Re: Philips 43PUS6501/12 EEPROM request.

      Originally posted by lotas
      715G7772-M01-B00-005K (Philips 49PUS6561/12)
      Thanks man, you are the best!

      Will report back with the results.

      Comment

      • lotas
        Badcaps Legend
        • Jan 2016
        • 4474
        • Russia

        #4
        Re: Philips 43PUS6501/12 EEPROM request.

        There is also a dump from 43PUS6501-12 MAIN 7115G7772-M0D-B00-005K if needed.

        Comment

        • unimatrix93
          Badcaps Veteran
          • Oct 2021
          • 339
          • Magyarország

          #5
          Re: Philips 43PUS6501/12 EEPROM request.

          Originally posted by lotas
          There is also a dump from 43PUS6501-12 MAIN 7115G7772-M0D-B00-005K if needed.
          Awesome, drop me that one too If you can please. It's a 43 inch model so maybe it would work better.

          Thanks again!

          Comment

          • lotas
            Badcaps Legend
            • Jan 2016
            • 4474
            • Russia

            #6
            Re: Philips 43PUS6501/12 EEPROM request.

            Originally posted by unimatrix93
            awesome, drop me that one too if you can please. It's a 43 inch model so maybe it would work better.

            Thanks again!
            43pus6501-12 main 7115g7772-m0d-b00-005k
            Attached Files

            Comment

            • unimatrix93
              Badcaps Veteran
              • Oct 2021
              • 339
              • Magyarország

              #7
              Re: Philips 43PUS6501/12 EEPROM request.

              Originally posted by lotas
              43pus6501-12 main 7115g7772-m0d-b00-005k
              I flashed it on the EEPROM IC but still no luck. It's still cycling colors

              Comment

              • Diah
                Badcaps Legend
                • Feb 2013
                • 6346
                • Germany

                #8
                Re: Philips 43PUS6501/12 EEPROM request.

                yours issue damaged LVDS Pins

                Comment

                • William1967
                  Badcaps Veteran
                  • Nov 2017
                  • 203
                  • Netherlands

                  #9
                  Re: Philips 43PUS6501/12 EEPROM request.

                  I guess you have an LG panel with an open cell t-con, when there is no signal detected from the mainboard the t-con goes in a WRGB mode.

                  Comment

                  • unimatrix93
                    Badcaps Veteran
                    • Oct 2021
                    • 339
                    • Magyarország

                    #10
                    Re: Philips 43PUS6501/12 EEPROM request.

                    I checked on the LVSD cable and the little notches on the side is torn off. The pins looks all intact both on the cable and in the sockets. Maybe without the notches its slides in the connector and by it makes it shorting/wrong contacts?

                    Comment

                    • unimatrix93
                      Badcaps Veteran
                      • Oct 2021
                      • 339
                      • Magyarország

                      #11
                      Re: Philips 43PUS6501/12 EEPROM request.

                      Originally posted by William1967
                      I guess you have an LG panel with an open cell t-con, when there is no signal detected from the mainboard the t-con goes in a WRGB mode.
                      I'm not sure about the panel, but you are probably right.

                      Comment

                      • Diah
                        Badcaps Legend
                        • Feb 2013
                        • 6346
                        • Germany

                        #12
                        Re: Philips 43PUS6501/12 EEPROM request.

                        Originally posted by unimatrix93
                        Maybe without the notches its slides in the connector and by it makes it shorting/wrong contacts?
                        show us clear photo of yours LVDS End from both side

                        Comment

                        • unimatrix93
                          Badcaps Veteran
                          • Oct 2021
                          • 339
                          • Magyarország

                          #13
                          Re: Philips 43PUS6501/12 EEPROM request.

                          Originally posted by Diah
                          show us clear photo of yours LVDS End from both side
                          Here are some close ups. I noticed a small bit of contact is missing from the smaller cable end.




                          Attached Files

                          Comment

                          • Diah
                            Badcaps Legend
                            • Feb 2013
                            • 6346
                            • Germany

                            #14
                            Re: Philips 43PUS6501/12 EEPROM request.

                            try Jumper the lost pin with extra thin cable from board to board. and clean the socket.. it could be the reset of the pins doing short some where

                            Comment

                            • nomoresonys
                              Badcaps Legend
                              • Jan 2013
                              • 12086
                              • U.S.

                              #15
                              Re: Philips 43PUS6501/12 EEPROM request.

                              Nice work Diah, you solved it with one post.

                              Comment

                              • unimatrix93
                                Badcaps Veteran
                                • Oct 2021
                                • 339
                                • Magyarország

                                #16
                                Re: Philips 43PUS6501/12 EEPROM request.

                                Originally posted by Diah
                                try Jumper the lost pin with extra thin cable from board to board. and clean the socket.. it could be the reset of the pins doing short some where
                                Thank you for the advice, will try it with some enameled copper wire If I can find some.

                                Comment

                                • William1967
                                  Badcaps Veteran
                                  • Nov 2017
                                  • 203
                                  • Netherlands

                                  #17
                                  Re: Philips 43PUS6501/12 EEPROM request.

                                  Replace both cables and never use cables without the nodges!!! If not placed correctly centered there could be a S/C.

                                  Comment

                                  • nomoresonys
                                    Badcaps Legend
                                    • Jan 2013
                                    • 12086
                                    • U.S.

                                    #18
                                    Re: Philips 43PUS6501/12 EEPROM request.

                                    Originally posted by William1967
                                    Replace both cables and never use cables without the nodges!!! If not placed correctly centered there could be a S/C.
                                    plus 100, don't risk shorting things out, just get some new cables.

                                    Comment

                                    Related Topics

                                    Collapse

                                    • my2k2
                                      Harman Kardon AVR 171, Request for IC1504 (24C32) eeprom dump file
                                      by my2k2
                                      Good day to every one,

                                      I have AVR 171 the IC1504 (24C32) eeprom is corrupted not able to read.
                                      Does anybody have an eeprom dump file? I really appreciate any help.
                                      Thanks in advance.
                                      07-01-2024, 09:04 PM
                                    • SidneyCanadas
                                      93C46 and 93C56 EEPROM
                                      by SidneyCanadas
                                      I tore apart my instrument cluster for my 2008 Toyota Corolla made in 2007 in Cambridge, Ontario, Canada and pcb location: IC6=EEPROM is a surface mounted device with part # of 93C46W7, some claim the EEPROM out of a Camry part # 93C56 will allow odometer to roll over 299 999 KM or miles. The data sheet for both is below:

                                      https://cdn.badcaps-static.com/pdfs/...c6e42b20d3.pdf 2

                                      Anyone know if the Camry one will work on my Corolla?. And which EEPROM reader/writers do you all recommend I purchase that will allow me to read the old values of the old...
                                      06-14-2023, 01:16 PM
                                    • Biruslapio
                                      Reprogram Philips 32PFL3008D Winbond EEPROM with ATMEGA328P
                                      by Biruslapio
                                      I've shearched before posting this, and found dozens of different ways to hook up multiple types of EEPROM to an Arduino Uno, so I do not know which one is correct.

                                      I need to learn this so I ended up with a Philips TV 32PFL3008D which has corrupted memory, the IC is U402, 25Q64FVSIG, I have the 3MB .bin file, how to hook up an ATMEGA328P to this memory and what code do I need?...
                                      12-03-2021, 08:33 AM
                                    • dmccul2698
                                      Pioneer DEX-P99rs "No EEProm " diagnostic code.
                                      by dmccul2698
                                      Hello, My head unit developed strange behaviors so I ran the built-in diagnostic package which returned "No EEProm". The service manual says there is no EEProm connected. I approached Pioneer and they said to swap out the DSP board. All said and good but the DSP board is $860 USD. I am hoping someone can help me

                                      1). Understand the schematic and check the connections between the EEProm and DSP
                                      2). Check the functionality of the EEProm

                                      I don't know if this is the unit's problem but it's a place to start.

                                      I have little to no electronic experience...
                                      04-08-2024, 05:32 PM
                                    • edgarmg15
                                      Damaged EEPROM on TV Vizio E320-A0
                                      by edgarmg15
                                      Hi everyone

                                      I´m trying to repair a TV Vizio E320-A0 that I found in the street

                                      The symptoms are it doesn't respond with remote or buttons, the LED indicator is always off and also there is no image on the TV.

                                      The power supply board works fine (I probed the terminals with my multimeter) but in the main board the EEPROM doesn't works correctly because the voltage on the pins doesn't match with the parameters of the datasheet.

                                      So, I´m going to replace the EEPROM with a new one, but the problem is that my programmer (CH341a)...
                                      11-19-2022, 03:46 PM
                                    • Loading...
                                    • No more items.
                                    Working...