Also mine is definitely not screen burn as it did not occur with the last board. My next option is to purchase a c9 board as its much closer in age and model to my c8. Trying to get the 120hz feature, which I did get with this bx board, but the pixelated colours are almost unbearable in some scenes. Did you ever try the c9 board like you stated you were going to?
-
-
Yep, the cloud issue cleared itself after using the tv a few minutes, did you try that ?
Did you leave the original Tcon on the panel ?Comment
-
yes, I only have the original tcon. I have tried updating the software so they can align, I have used the TV for several hours and it is still happening. it seems its not present when using the VIVID picture mode, I have tried adjusting all settings in other modes to see if its something specific, to no avail. I rather not use vivid picture mode as I am wanting to use it for gaming. any ideas?Originally posted by cheebster View PostComment
-
I wonder if its because you used the "in_stop" on a service remote. apparently that resets the panel itself. thats the only thing I have not tried as I don't have a service remote.
Comment
-
call in_start service menu.. and show what do you have under OLEDComment
-
-
here are the issue.
Panel Matching NULL ..... it should be OK
Source PCBA PID NULL here should 12 serial listed
T-CON PCBA PID NULL here should the same above serial
TRY;
downgrade the firmware first... then updated to the last hopefully will listed the missing .. or via IN_STOPComment
-
How do I downgrade? I dd already update the software, but from what I'm reading online LG put a stop to software downgrade.Originally posted by Diah View PostComment
-
Comment