HP DPS-800GB-a don´t work

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • fpsousa
    Member
    • Dec 2015
    • 29
    • Portugal

    #1

    HP DPS-800GB-a don´t work

    Hi,
    I´ve to repair this PSU from a server, that don´t work at all, no green Led,no fans and even no st-by voltage.
    Only plug at 220V in series with a 100W lamp bulb, it makes a initial flash (caps charging) and reduces to a low light, permanently.
    There are a board attached to the mother that has many components in her.
    Any idea to start the troubleshooting?
    Tank you.
  • keeney123
    Lauren
    • Sep 2014
    • 2536
    • United States

    #2
    Re: HP DPS-800GB-a don´t work

    I would say check this thread out first.
    https://www.badcaps.net/forum/showthread.php?t=38391

    Comment

    Related Topics

    Collapse

    • t4796
      Fender Mustang non valve guitar amp - owner connected 110v amp to 220v.
      by t4796
      Hi all,

      I recently picked up this amp as not working. I took it as is. Didn't notice until I got home it had foreign power plug and was marked 110v and our local voltage is 220v so then I knew what had happened to it.

      Opened it up and was able to find the schematic online. In the schematic I have uploaded I have erased the parts for 220v operation to make it easier for me to visualise however I have since added the two additional diodes and remove the wire link from the power supply so I can test it easier on 220v

      From the FAQ I learnt that for 110v the power...
      10-25-2024, 06:59 PM
    • hollox123
      ASUS ROG Strix G713QR - Keyboard, backlight and side LEDs don't work
      by hollox123
      Hello, I have an "ASUS ROG Strix G713QR" laptop, and for approx. 3 months I have the following problems:

      1. Laptop keyboard doesn't work
      2. The backlight on the laptop keyboard doesn't work
      3. The x2 side LEDs (red) on the laptop don't work

      The power button works, the touchpad works, and all the USB, HDMI, Ethernet, etc. ports work.

      I already tried to reinstall all the drivers and reinstall Windows. So I don't know what to try anymore that is software-related.

      But I am strongly aiming that it is somehow a BIOS-related problem,...
      05-11-2025, 08:05 AM
    • resistor83
      lenovo 330s-15ikb, led num lock key always on and numbers don't work
      by resistor83
      hello everyone, I have a particular problem with this lenovo ideapad 330s-15ikb. I had to replace the motherboard due to liquid damage, after replacing it I noticed that some letters on the keyboard do not work. So I bought a new keyboard and now all the keys work except the numeric keypad area. In practice the num lock key LED always remains on and the numbers do not work. Has anything like this ever happened to you? I also tried changing the keyboard again but the same defect remains on the numeric keypad.

      I tried updating the bios but the problem remains

      https://s...
      05-29-2025, 08:06 AM
    • sam_sam_sam
      DYMO Rhino 5200 Industrial Label Maker that the backlight does not work any ideas
      by sam_sam_sam
      I just bought a used one for a decent price for a used device it prints very nicely and clean and clearly so I am not going to complain about it but I would like to get it working again anyone have any suggestions on how to repair this back light

      If I can not get the controller to work properly then I will probably have an external power supply for the backlight because it is difficult to see the screen without out it

      One —>the LEDs might be bad
      Two —> the buck converter or regular might be bad
      Three —> the controller might not...
      08-08-2023, 05:12 PM
    • Rhaverz
      My touchpad doesn't work, Asus laptop motherboard X455LJ REV 3.1
      by Rhaverz
      Good afternoon friends

      I have an Asus laptop motherboard X455LJ REV 3.1 that the touch pad does not work, I was trying to check if something was wrong at the drive level but I did all the necessary installations and the touchpad still does not work.

      I have a feeling that the error goes more to the board level because the touchpad is not recognized by the device manager and it is supposed that even if it does not work correctly it has to be detected.

      I even checked that the data bus made a connection between the touchpad and the motherboard and everything...
      03-30-2023, 03:56 PM
    • Loading...
    • No more items.
    Working...