DYMO Rhino 5200 Industrial Label Maker that the backlight does not work any ideas

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sam_sam_sam
    Badcaps Legend
    • Jul 2011
    • 6061
    • USA

    #61
    Once it gets to around 80% it slows down the charging rate to a very —-> very slow rate of charging until it is fully charged
    Last edited by sam_sam_sam; 02-16-2025, 01:05 PM.

    Comment

    • sam_sam_sam
      Badcaps Legend
      • Jul 2011
      • 6061
      • USA

      #62
      Even now it still slow charging the battery pack which seems to be normal for this device this is another project that is completed and it turned out very well and it is very hard to tell that the battery pack has had the battery cells replaced

      Now it is time to get the Ryobi single row of battery cells replaced with new battery cells and complete this project as well soon I hope
      Last edited by sam_sam_sam; 02-16-2025, 06:11 PM.

      Comment

      Related Topics

      Collapse

      • Document Archive
        HP ProBook 450 G9 + Voyager 5200 Notebook 400 Specification for Upgrade or Repair
        by Document Archive
        This specification for the HP ProBook 450 G9 + Voyager 5200 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 450 G9 + Voyager 5200 boardview and 450 G9 + Voyager 5200 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification,...
        09-07-2024, 07:12 AM
      • Document Archive
        HP EliteBook 650 G9 + Voyager 5200 Notebook Specification for Upgrade or Repair
        by Document Archive
        This specification for the HP EliteBook 650 G9 + Voyager 5200 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 650 G9 + Voyager 5200 boardview and 650 G9 + Voyager 5200 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification,...
        09-07-2024, 07:12 AM
      • Document Archive
        Acer Aspire A317-51G-5200 Notebook 3 Specification for Upgrade or Repair
        by Document Archive
        This specification for the Acer Aspire A317-51G-5200 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the A317-51G-5200 boardview and A317-51G-5200 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
        09-06-2024, 02:34 PM
      • sam_sam_sam
        20 year old Kenmore refrigerator ice maker bad water valve coil took a crap
        by sam_sam_sam
        I got lucky that when I got home and was about to get some ice out of the ice dispenser I hear and see water running down the outside of the ice dispenser what the heck is going on here

        At first I thought that the ice dispenser mold was cracked so I brought a new ice maker because this one has been in there for about 10 years now

        Well I put the new one in and wait and I wait for the water valve to open and let water in no such luck well there is a way to check the function of the motor and the water valve on this ice maker just need a jumper wire “L” to...
        04-09-2023, 08:04 PM
      • ETx13
        Ninja CM400C coffee maker not turning on
        by ETx13
        Pretty sure I know the answer to this but thought I'd ask here anyways. Got this nice coffee maker from someone since it just died on them. Long story short a surge blew a fuse and MOV in the power supply. I replaced both and tested, machine came back to life! Decided to try to take a video to show a friend and that's when I heard the relay click on and water start boiling in the tank and the display/buttons are now dead again. Did a bunch of testing, couldn't figure out why this is happening, every time I plug it in, the heater turns on via the relay. To try and test more things, I decided to...
        07-01-2024, 07:31 PM
      • Loading...
      • No more items.
      Working...