I was just looking to get some advice on a couple of Tripp-light smart online Battery back up UPS's that I have with a "No Power on Issue" When plugged in I get no lights, no fans....The few things I did was #1. bypass the reset button and still no go...#2. I pulled the board and check for any burn marks, bulged caps, etc. But everything looks brand new? #3. the final thing I did was charge the 4 batteries in both the units ( 4-12v 7.5amp battery's.) and it looks like none of them will hold a decent charge! Looks like units have been sitting for awhile... one of the batteries had a date of 12/20/14
I have had big units similar to these with bad batteries and they would still power on, fans run etc but would give a code/light on the face for faulty/dead Battery's....
Does anyone know if these particular tripp-light units need fresh batteries to power up?? I would not think so, but I cant really seem to find any other issues with the 2 units? I did not find any hot/burn marks on boards, fuses good, and caps test ok?
Any Ideas? advice? Any help much appreciated!!
Thanks!!
I have had big units similar to these with bad batteries and they would still power on, fans run etc but would give a code/light on the face for faulty/dead Battery's....
Does anyone know if these particular tripp-light units need fresh batteries to power up?? I would not think so, but I cant really seem to find any other issues with the 2 units? I did not find any hot/burn marks on boards, fuses good, and caps test ok?
Any Ideas? advice? Any help much appreciated!!
Thanks!!
Comment