I'm recapping my Corsair VX450 due to age. From 2008, it's 6-1/2 years old now. The PSU works fine, loafing along at ~150-200W output.
The caps are all United Chemi-Con, mostly KY and a few bigger KZE's, primary KMQ and one Rubycon YXG.
The outputs have a single 1,000uF 16V KY on each, which seems small
KZE ESR 23m 1.82A ripple 4,000hrs lifetime D=10mm
KY ESR 46m 1.40A ripple 7,000hrs lifetime D=10mm
The KY's have higher ESR but longer lifetime specs than the KZE.
I'm not sure what to go with. Any recommendations? I'm tempted to upsize the O/P caps to maybe 1,500-2,200uF (D=12.5mm) if they'll fit.
The PSU is made by Seasonic, inside looks like the Antec Earthwatts 430W, CX400W from 2008 etc.
(here's generic inside pics, but w/Hitachi primary cap)
The caps are all United Chemi-Con, mostly KY and a few bigger KZE's, primary KMQ and one Rubycon YXG.
The outputs have a single 1,000uF 16V KY on each, which seems small

KZE ESR 23m 1.82A ripple 4,000hrs lifetime D=10mm
KY ESR 46m 1.40A ripple 7,000hrs lifetime D=10mm
The KY's have higher ESR but longer lifetime specs than the KZE.
I'm not sure what to go with. Any recommendations? I'm tempted to upsize the O/P caps to maybe 1,500-2,200uF (D=12.5mm) if they'll fit.
The PSU is made by Seasonic, inside looks like the Antec Earthwatts 430W, CX400W from 2008 etc.
(here's generic inside pics, but w/Hitachi primary cap)
Comment