Hi whizkidz,
Inspecting the logic board I found this bad looking smd component just under the display connector, but I haven't schematics, can you help me please identify it to be proper changed? This A2337 show image in LCD but has no backlight at all and no detect internal camera
Hi,
@slimmy182, I have the exact same problem, same SMD. MAy you share on what you did to remedy this or what you did to fix this issue?
I'm fresh out electronics and this is my first repair. Any advice would be appreciated.
Hi All., does anyone have the schematics for Apple MacBook Air A2337 audio Board P/n: 820-01929-A or if someone knows the values of these 5 caps (4 big same size & one small) Thanks in advance
Guys, never mind I got the values of these caps. The larger 4 caps are .01MF 25V & the smaller caps is 220PF 25v... My package for the .01 was not the exact pack, I installed the smaller pack & all worked fine. Audio is perfect. Thanks though
Thank you so much for your hard work on the board view! Minor correction for a comming v1.4; RP603 is GND on leg 2, not PP3V3_SW_LCD.
Yes, I just confirmed this on an actual logic board too. As far as I see it the schematic is wrong and this cannot be corrected AFAIK. Hence the board view is incorrect because I assume it is following the schematic. It's a tricky situation for @whizkidz
Comment