GRANGER-6050A2977701-MB-A03 schematic

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • zendalo
    New Member
    • Aug 2013
    • 8
    • Portugal
    #1

    GRANGER-6050A2977701-MB-A03 schematic

    Hello ppl!
    I have a Hp 14 Laptop CK09890NA, and I have searched on net trying to find a schematic, but I couldn't get nothing about this model except the BIOS file.
    The motherboard is GRANGER-6050A2977701-MB-A03 (A3), 14-STD-GLK, TPN-I131. Laptop won't boot, and I find that the power Mosfets are damaged but I can't identificate them. They are marked as Q66010 AND Q66010 on the motherboard.
    1 Mosfet - 6794 GV8G14
    2 Mosfet - 6380 GA8613. I couldn't find anything on Google.

    Any help I will appreciate much.
    Thanks
    Kind Regards from Lisbon
    Attached Files
    Last edited by SMDFlea; 01-10-2024, 03:13 AM.
    Tags: None
    • piernov
      Super Moderator
      • Jan 2016
      • 4437
      • France
      #2
      Re: Hp 14 ck0989na

      Second picture shows CPU VCore MOSFETs and they don't look damaged.
      OpenBoardView — https://github.com/OpenBoardView/OpenBoardView

        Comment

        • uresol
          New Member
          • Sep 2018
          • 6
          • medellin
          #3
          Re: Hp 14 ck0989na

          the mosfet q66011 is an aon6794 and the other is aon 6380
          Last edited by piernov; 11-29-2021, 03:55 AM. Reason: google translate

            Comment

            • elmo89
              Member
              • Oct 2014
              • 38
              • Malaysia
              #4
              Hi, I need a schematic for this laptop. If there is a boardview, that would be great. Thank you.

              HP 14-ck0096TU
              GRANGER-6050A2977701-MB-A03(A3)

                Comment

                • uresol
                  New Member
                  • Sep 2018
                  • 6
                  • medellin
                  #5
                  GOOD AFTERNOON, DID ANYONE GET THE SCHEMATIC OF THIS TEAM?

                    Comment

                    • Andri15
                      Member
                      • Jul 2024
                      • 42
                      • indonesia
                      #6
                      re: GRANGER-6050A2977701-MB-A03

                      I need this schematic or boardview

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • Jane
                          How do you test MOSFET in laptops ?
                          by Jane
                          I tried to use this method:

                          Testing an N-channel MOSFET:

                          Step 1: Discharge the Gate (turn off the MOSFET)
                          Place the black probe (COM) on the Source (S) and the red probe on the Drain (D). The multimeter should show no continuity (high resistance or "OL" – open line).
                          Then, touch the black probe to the Source (S) and the red probe to the Gate (G). This discharges any stored charge in the Gate, turning the MOSFET off.

                          Step 2: Charge the Gate (turn on the MOSFET)
                          Now, place the red probe on the Gate (G) and the black probe on the                          ...
                          09-27-2024, 03:31 AM
                        • Nooy
                          VGA MOSfet permanently shorted and loss of MOSfet pad
                          by Nooy
                          Hello everyone, I recently found this badcaps site and super Learn Electronics Repair youtube channel. And I wanted to learn how to troubleshoot power supplies and VGA cards and how to practice soldering, since I already have a properly defective piece of them. I am currently trying to solve two problems:

                          I have a Gigabyte GV-RX460WF2OC-4GD type card. I managed to find the faulty MOSfet (AON6414A) on it, which I replaced. The card starts up, but after about half a minute, the MOSfet in the same position will be shorted again. Is it possible that the PWM controller driving the MOSfet...
                          02-14-2024, 02:26 AM
                        • AppleLover123
                          Asus X712EA 3 volts after the first mosfet
                          by AppleLover123
                          Hey guys,

                          i have a asus motherboard here and as the title says after the first mosfet (in the picture) there is nothing more than 3.15v.
                          I injected 19v and max. 1 amp at the charging port and there is not voltage drop or smth. It's just taking 19v and 1 milliamp.
                          Then i tried to inject 19v and max 1amp after the current sensor and there it first takes 19v and 4 milliamps and after 2 seconds it is taking nothing (no current).
                          I measured on the coils on board everything seems fine. Also the main power rail is not shorted (infinite resistance).
                          Now i thought something...
                          12-15-2024, 07:49 AM
                        • MicroSMD Lab
                          ASUS ROG Zephyrus GPU Mosfet repeat failure
                          by MicroSMD Lab
                          The board number is GU502DU. I repaired this a couple weeks ago and it came back with the same issue, same mosfet failed (PQH9201). I'm hoping that the GPU was spared this time.
                          I used the same replacement part (purchased from Mouser) and I'm certain the soldering was done properly since it took just as much effort to remove as before. What could cause this same mosfet to fail? I'm thinking if it was unsuitable then the others would fail too. I looked for similar failures on YTube and the mosfet was replaced with AOE6930 in one instance and AOE6932 in the other but it's possible that the...
                          01-10-2024, 06:36 AM
                        • Scotchmist
                          Asus GA502D keeps blowing mosfet
                          by Scotchmist
                          I have an Asus GA502D, it had a blown mosfet which I replaced and the laptop booted into windows, a few mins later it shut off, the same mosfet was blown. I thought maybe just a bad mosfet but same thing happened again, a few mins in windows and shuts off.

                          I have removed the mosfet and can run the laptop no problem

                          The MOSFET is FDPC5018SG

                          Can anyone point me in the direction of what could be the cause of this, could it be the controller rt3663bc?

                          Thanks
                          08-24-2024, 02:23 PM
                        • Loading...
                        • No more items.
                        Working...