Re: A2159 MacBook Pro (13-inch, 2019) 820-01598-06
WooooW, Thank you a lot!!!
WooooW, Thank you a lot!!!
-
-
Re: A2159 MacBook Pro (13-inch, 2019) 820-01598-06
Thank you!Comment
-
Re: A2159 MacBook Pro (13-inch, 2019) 820-01598-06
thanksComment
-
Re: A2159 MacBook Pro (13-inch, 2019) 820-01598-06
Thanks!!Comment
-
Re: A2159 MacBook Pro (13-inch, 2019) 820-01598-06
thanks, working fine!Comment
-
Re: A2159 MacBook Pro (13-inch, 2019) 820-01598-06
ThanksssssssComment
-
Re: A2159 MacBook Pro (13-inch, 2019) 820-01598-06
thankComment
-
Re: A2159 MacBook Pro (13-inch, 2019) 820-01598-06
Sorry just catching up, thank you to all who helped and contributed! Much appreciated!Comment
-
Re: A2159 MacBook Pro (13-inch, 2019) 820-01598-06
thanks~Comment
-
Re: A2159 MacBook Pro (13-inch, 2019) 820-01598-06
Here brd file
techman1025Comment
-
Re: A2159 MacBook Pro (13-inch, 2019) 820-01598-06
That LB does not match my board at all. I have a 2020 A2179
I cannot find a bord number on it.Comment
-
Re: A2159 MacBook Pro (13-inch, 2019) 820-01598-06
Title clearly says A2159. Use search function for A2179…OpenBoardView — https://github.com/OpenBoardView/OpenBoardViewComment
-
Re: A2159 MacBook Pro (13-inch, 2019) 820-01598-06
here is bw and schematicComment
-
Re: A2159 MacBook Pro (13-inch, 2019) 820-01598-06
bwComment
-
Re: A2159 MacBook Pro (13-inch, 2019) 820-01598-06
Thank you very muchComment
-
Re: A2159 MacBook Pro (13-inch, 2019) 820-01598-06
thanksComment
-
Re: A2159 MacBook Pro (13-inch, 2019) 820-01598-06
Thank you peopleComment
-
Re: A2159 MacBook Pro (13-inch, 2019) 820-01598-06
Thank you very muchLast edited by SMDFlea; 08-04-2021, 06:20 AM.Comment
-
hi
i whant unlock macbook pro A1932 2019 whit ibridge 9,3 ;
i change efi files find on files mina T2 activator 1,4 and use for activation mina T2 activator 1,3 , but fault ssh?
i use mina T2 ramdisk activator 1,0 and 3,0 . but whon t work ?
have you other programme or method compatible whit this macbook ibridge 9,3 for bypass ?
I need help or information?
Does anyone have the minat2 activator 1.4 software?
Or did they use it for bypass macbook air 2019 a1932 with new ibridge 9.3?
Thank yo...03-12-2025, 10:14 AM -
Trackpad clicks.
Plugging in a genuine USB-C charger and any other charger = 20V and charges all the way.
Plugging in a Dell USB-C dock or monitor causes the voltage to cycle endlessly between 5V and 19V
The Caps Lock button doesn't illuminate.
Holding the power button (fingerprint scanner) for 10 seconds stops the trackpad clicking temporarily, but it starts clicking again after 3 seconds.
If I open the lid slightly, the trackpad stops clicking (it seems to be detecting the lid opening/closing).
The keyboard backlight... -
Hi. I suspect the SSD has failed on this machine. I couldn't find answers googling it hence my question. Can you just take and replace SSD from another mac 2019 or it need to be programmed with serial numbers etc? Also eg. if my macbook is 128GB and using only one slot/bank for the SSD and another slot/bank is not being used (empty), can you remove the SSD from slot 1 and put it into slot 2, would it work? I know for a fact that those SSD are set in RAID partitions so if arranged in wrong order it's not going to work, but I'm curious if it needs programming also if the SSD can be soldered onto... -
I need dump file for nand A2159 512GB with 2 Nand chips >.I upgraded 128gb to 512gb..I use P13 there are only 4Chips...
I need dump file MACBOOK PRO A2159
TSB4232(256)
TSB4229(256)
Thanks -
mb code:820-01827-A;
sn:C02Z349ALVDR;
i9 32GB Ram 1TB
Hi, I found short on one of 6 black nand (total 1TB).
i removed all 6 nand ( voltages all ok) and now i want to program with JC P15 but for A1990 2019 there is only 512GB configuration.
I try A2141 1TB configurazion with TSB4228 but the position on pcb is different ( U9300 and U9400 is no stuff on A1990 but present on A2141 and U8800 and U8900 is no stuff on A2141 but present on A1990 )
macbook with A2141 configuration run on recovery but don't complete it.
anyone can help me?05-26-2025, 09:27 AM
Comment