Apple Mac pro 13" A1502 820- 3476-A no power, need schematic and boardview

[dfbaaaa]

Re: Apple Mac pro 13" A1502 820- 3476-A no power, need schematic and boardview

Here are the board view and schematic. Good luck with your repair.

Thank you very much!

[mcse2k]

Re: Apple Mac pro 13" A1502 820- 3476-A no power, need schematic and boardview

Hi Meritosari, Thanks so much. I like it.

[king_Air]

Re: Apple Mac pro 13" A1502 820- 3476-A no power, need schematic and boardview

Here are the board view and schematic. Good luck with your repair.

hallo ich habe die Datein geladen, jedoch Probleme die .brt Datei zu öffnen. Welches Board Viewer kann ich dafür denn benutzten, EAGLE und ALLEGRO gehen nicht.

[piernov]

Re: Apple Mac pro 13" A1502 820- 3476-A no power, need schematic and boardview

Check this: http://openboardview.org/

[rtstorm]

Re: Apple Mac pro 13" A1502 820- 3476-A no power, need schematic and boardview

Hi Yakideo,

Do you know where i can download more apple macbook and iMac schematics?
regards, Henk

download from this guy

https://drive.google.com/drive/u/0/f...E1XRkhtcU0tMUk

[dfbaaaa]

Re: Apple Mac pro 13" A1502 820- 3476-A no power, need schematic and boardview

Thank's!!!!

[w4tchn0w]

Re: Apple Mac pro 13" A1502 820- 3476-A no power, need schematic and boardview

Hello all,

I have lost the pin point GND for Bios chip on the motherboard, where Can I connect the GND of the BIOS chip?
And what's name of Viewer compatible with A1502 820-3476-A BRD file?

Thanks for informations

Best regards

[inflex]

Re: Apple Mac pro 13" A1502 820- 3476-A no power, need schematic and boardview

And what's name of Viewer compatible with A1502 820-3476-A BRD file?

Openboardview - http://openboardview.org

Click on any other GND pin when you load the board and look for the closest ground to your BIOS.

[w4tchn0w]

Re: Apple Mac pro 13" A1502 820- 3476-A no power, need schematic and boardview

Hello,

Thanks for your fast response

In Openboard ( install version and live version without install ) i had a problem

i have this message :

[inflex]

Re: Apple Mac pro 13" A1502 820- 3476-A no power, need schematic and boardview

Hello,

Thanks for your fast response

In Openboard ( install version and live version without install ) i had a problem

I wonder if your BRD file was/is corrupted? Try the one included in the attached ZIP.

[w4tchn0w]

Re: Apple Mac pro 13" A1502 820- 3476-A no power, need schematic and boardview

Good, i ran it on my other computer with Windows 7 64 bits, work perfectly, i see many GND point on resistor, but i don't have exactly the same board, it's similar but not the same, mine is Macbook Pro 13" Retina 2015 2,7 HY1866 8G SI, A1502 EMC 2835, where can i find the exact board diagram?

Thanks for informations/help & patience

[danro]

Re: Apple Mac pro 13" A1502 820- 3476-A no power, need schematic and boardview

Thank you! All the best!

[firebox]

Re: Apple Mac pro 13" A1502 820- 3476-A no power, need schematic and boardview

Thanks for information

[appasa]

Re: Apple Mac pro 13" A1502 820- 3476-A no power, need schematic and boardview

might be this one:

thank you

[bajinchi]

Re: Apple Mac pro 13" A1502 820- 3476-A no power, need schematic and boardview

Thank you dude!

[anand797]

Re: Apple Mac pro 13" A1502 820- 3476-A no power, need schematic and boardview

Thanks for sharing

[agianmaker]

Re: Apple Mac pro 13" A1502 820- 3476-A no power, need schematic and boardview

Thank you very much for sharing this file

[jmasterfunk]

Re: Apple Mac pro 13" A1502 820- 3476-A no power, need schematic and boardview

Great file! Thanks!

[dawid1982]

Re: Apple Mac pro 13" A1502 820- 3476-A no power, need schematic and boardview

Thank you !!!

[moohjang]

Re: Apple Mac pro 13" A1502 820- 3476-A no power, need schematic and boardview

Thank you so much