qompaq f700

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • adnan
    Member
    • Oct 2011
    • 17

    #1

    qompaq f700

    im looking for schematecdiagram for qompaq presareo f700
  • raizenn27
    Senior Member
    • Jun 2011
    • 97
    • philippines

    #2
    Re: qompaq f700

    http://www.4shared.com/document/MF4c...chematics.html try this link dude...

    Comment

    Related Topics

    Collapse

    • Whale linguini
      General Question(s) & Question About USB Jtag u-Link NT
      by Whale linguini
      I'm not sure if I am posting this in the right spot, I don't have any question or anything specific to one board. I am *kinda* starting out with this kind of work. I have been IT in one role or another for my job the last 30 years, and I am familiar enough with basic board stuff generally speaking. So, I dunno for example if someone told me to find a uart header, or flash some generic tsop8 something, etc I understand that kind of stuff. Point being, I'm not 100% clueless. I just don't have the specific knowledge when it comes to some of these more advanced repairs. I actually have spent the last...
      07-26-2024, 02:12 PM
    • daniel0799
      Full 25Q40 dump for TP-LINK TL-SG1016D V7 (RTL8382L + 2x RTL8218B, PCB KB616010558)
      by daniel0799
      Hi everyone,

      I’m looking for the **full 512KB (25Q40) SPI dump** for **TP-LINK TL-SG1016D V7 (unmanaged)**, PCB code **KB616010558**, with SoC **RTL8382L + 2×RTL8218B**.

      My current dump only initializes 8 ports and the LEDs are misaligned, so I believe I have a firmware from an 8-port model.
      I need a complete dump (bootloader + firmware) from a working switch to restore full 16-port operation.

      If anyone has this model or a similar V7 revision, please share the BIN file or point me to a resource.
      I can provide photos of my board and the flash...
      10-22-2025, 11:12 AM
    • Tomylee
      Identification of Component T5 on NEXIQ USB-Link 2 (damaged due to crushing)
      by Tomylee
      Hi everyone,
      I'm currently repairing a NEXIQ USB-Link 2 that was physically damaged due to crushing. After a thorough inspection, it appears that only one component is visibly damaged: the T5 component, located right next to the Mini-USB port.

      It's a 4-pin SMD component, with one pin at each corner, aligned front-to-back along the USB port axis. Unfortunately, it is broken, and there are no visible markings left on the part to identify it.

      I'm looking for help with the following:

      The exact identification or part number of the T5 component
      ...
      05-28-2025, 12:42 PM
    • spleenharvester
      TP-Link Kasa KP105 - rapidly power cycling when plugged in
      by spleenharvester
      One of my KP105 smart plugs failed today. It started very rapidly power cycling (you could hear the relay clicking on and off and the LED was going green/orange repeatedly).

      I was going to just bin it but I opened it up out of curiosity. Found a swollen cap in the corner (bottom right of image). AiSHi brand, 470uF 10V 105*C. Not sure what purpose it serves exactly so can't comment on whether it is appropriately specced. Other members of this forum have reported similar findings with off-brand smart plugs but this is the first time I have seen evidence of this happening with a brand...
      05-21-2025, 11:26 AM
    • mido50
      Tp link td-w8950nd V2 dump
      by mido50
      hi guys, I need Tp link td-w8950nd V2 working dump
      10-23-2024, 01:54 PM
    • Loading...
    • No more items.
    Working...