hi guys, I need Tp link td-w8950nd V2 working dump
Tp link td-w8950nd V2 dump
Collapse
X
Related Topics
Collapse
-
by FedorovVMSI Alpha 15 B5EEK-237XRU SN:K2209N0193161
Came without initialization. Before that, it was not under repair. With BIOS from the official website, there is a start Ok, after a while the fans gain speed and the laptop turns off.
The cooling system is cleaned, the contact spot is good.
I need a working dump from laptop to check.
This is an original, not working dump....-
Channel: BIOS Requests ONLY!
03-10-2024, 07:26 PM -
-
by pasteleoHello,
I have a bricked router, I need full dump firm TP-Link Archer C6 V2 EU. The chipset is: cfeon qh64a-104hip, the ch341a say the chipset is: EN25QH64
Thanks-
Channel: Troubleshooting & Designing Networks
10-16-2024, 03:21 PM -
-
by gshark1Hi, I've exhausted lots of software side options to try and fix why my nvidia 2070 GPU has disappeared from my gaming laptop MSI GL75-10SFK. The system boots and functions normally but only using Intel integrated graphics. Before, it was working fine then began having some blue screens. (I will attach the system event and mini-dump at the end of post). After a few days of the occasional BSODs it finally disappeared from device manager and never came back. I researched and attempted to troubleshoot this issue but im out of options and was wondering if yall had some ideas maybe on the hardware side....
-
by Bimad99Hello everyone,
i need a working bios for an HP elitedesk 705 g2 base model sff machine, the problem is the machine turns on but there is no display.
SERIAL NUMBER : CZC615CDTY
BOARD MODEL NUMBER : 798073-001 REV 0C
THE BACKUP DUMPS ARE ATTACHED DOWN BELOW.
And this model has three SPI FLASH ICs, two 64mb (U19 and U68) and one 8mb (U11), i need clarification which one is the main bios chip ???!!!...-
Channel: BIOS & Schematic Requests!
05-19-2024, 04:51 AM -
-
by MephysisHello guys i really need help, i recently updated my DS-7208HGHI-K1 and it somehow got bricked, I've got it up and working now by flashing a new dump file i found but the serial number is really wrong and the uploader of the dump file probably intentionally did it.
I still have the bricked dump file is it possible to transfer the serial number of the "bricked dump" to the "working dump"? - Loading...
- No more items.