Gateway GWNR71517-BK

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • shawnpsx323
    Member
    • Jan 2022
    • 30
    • USA

    #1

    Gateway GWNR71517-BK

    Board # N14PB Rev 1.1

    Good day all. Im looking to get schematic or boardview for this board. 3.3V supply for the NVME ports was burnt out, and can't get any info on the part.
    Markings on the burnt component is 7603 HrCB. Any help will be appreciated. Thanks.
    Last edited by shawnpsx323; 09-27-2023, 11:26 AM.
  • SMDFlea
    Super Moderator
    • Jan 2018
    • 20481
    • UK

    #2
    Re: Gateway GWNR71517-BK

    Originally posted by shawnpsx323
    Board # N14PB Rev 1.1

    Good day all. Im looking to get schematic or boardview for this board. 3.3V supply for the NVME ports was burnt out, and can't get any info on the part.
    Markings on the burnt component is 7603 HrCB. Any help will be appreciated. Thanks.
    Please attach images directly to your post.

    .
    All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

    Comment

    • shawnpsx323
      Member
      • Jan 2022
      • 30
      • USA

      #3
      Re: Gateway GWNR71517-BK

      Originally posted by SMDFlea
      Please attach images directly to your post.

      .
      Not sure if this works
      Attached Files
      Last edited by shawnpsx323; 09-27-2023, 11:46 AM.

      Comment

      Related Topics

      Collapse

      • cdsh009
        need bios for gateway GWTN156-*** N14PB REV: 1.0
        by cdsh009
        Hello, I need the bios for this laptop GWTN156-4GR

        ​ , the problem it presents is that when trying to give video it turns off, sometimes it gives video but it turns off again, thanks
        09-08-2022, 10:11 AM
      • mferna14
        Apple MacBook Pro A2338 820-02773-A AON Rail burnt
        by mferna14
        Hi Dear Friend., I am working on a Apple MacBook Pro A2338 820-02773-A. The history was that the AON Rail on the Trackpad connector JT400 was burnt. After I removed the burnt connector, I tested with the meter & no shorts. Connected the USB C power & all booted fine, no problems at all. I soldered a New TP connector put in the old trackpad with a brand new Flex cable. The laptop beeped in the start but no display. I removed the connector & the display was fine again. USED a known good Trackpad & a Flex cable, even with this still the same problem. I checked the connector whether...
        06-25-2025, 11:26 AM
      • CG2
        LED uplighter dimmer burnt resistor
        by CG2
        I've got a 240v LED uplighter which isn't working. Pulling it apart shows a clearly burnt resistor on the circuit board, and I'm hoping some of you will have suggestions on what to replace it with. First, here are some photos. Power comes in, through the fuse and choke, then through the big blue variable resistor labelled B500K (ignore the similar blue component at the bottom - it's a simple switch for an attached reading lamp). It then passes through the burnt resistor (or at least did once), through diac DB1 and the unburned 30 ohm resistor to the gate of the triac.Now I assume there's a simple...
        02-14-2024, 09:23 AM
      • jm1234
        Siemens induction panel PCB burnt
        by jm1234
        Hi,
        this is a Siemens induction panel, one side seems damaged, I attached both good and burnt picture to compare. I'm not sure what those rectangles a are for, but they are connected by a solder. That seems to be what got burnt, so I'm wondering it that was some kind of a protection. Do I just try to re-solder them?
        Thanks,
        Daniel...
        01-15-2024, 01:22 AM
      • miccodan
        Advice / Help with Dell Inspiron P59G001 with burnt chip (PU5101)
        by miccodan
        Hello All,

        This is my first post here, I have worked in IT all my life however my knowledge when it comes to component level motherboard repair is extremely limited. That being said I have been attempting to learn more in this area. This laptop in question had liquid spilled on it a couple years back. No repair attempt was made at that time.

        Upon plugging the laptop in and attempting to power it does not do anything besides show a white status light on the front that blinks on and off continuously. I then proceeded to remove the board from the laptop and inspected further....
        12-05-2023, 09:09 PM
      • Loading...
      • No more items.
      Working...