Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Thanks. Works with ver.16.6 viewer...
-
-
Thanks for this but the .brd files will not open in boardviewer. Any other boardviewer to try?...
Leave a comment:
-
Thanks Guys. I figured it out. I typed the wrong thing. System disable should have read "842*****" instead of "824*****"...
Leave a comment:
-
Can someone assist?
I NEED DELL INSPIRON 15-3521 BIOS PASSWORD TO UNLOCK
System Disable
8248339B62105392
SERVICE TAG
52ZBRZ1...
Leave a comment:
-
-
-
Acer Nitro 5 AN515-54
MD# N18C3
Board # EH5VF-LA-H501P Rev1A.
S/N NHQ59AA002014116513400.
Good day all, can someone help me in extracting the EC from the bios file attached? I did go through the BIOS Guide, but the first pad area as described in the guide, is only 8kb on this file. The ENE KB9022 chip is 128kb so im confused. The original ENE chip seem to have died after a PCH failure (dead short from PU1101 supply side on the PCH). The PCH had been replaced but laptop still remains dead. The ENE was also replaced but need the EC file to program it.
Thanks...
Leave a comment:
-
-
-
-
-
Re: Gateway GWNR71517-BK
Not sure if this works...Last edited by shawnpsx323; 09-27-2023, 11:46 AM.
Leave a comment:
-
Gateway GWNR71517-BK
Board # N14PB Rev 1.1
Good day all. Im looking to get schematic or boardview for this board. 3.3V supply for the NVME ports was burnt out, and can't get any info on the part.
Markings on the burnt component is 7603 HrCB. Any help will be appreciated. Thanks.Last edited by shawnpsx323; 09-27-2023, 11:26 AM.
-
Re: x441BA rev 2.1
Thank you for this. Was able to figure out what some corroded components were......
Leave a comment:
-
Re: Macbook Air A2337 Schematic & SilkScreen – 820-02016 Schematic & SilkScreen (Prov
Thanks to this I was able to repair one with a backlight issue. ...
Leave a comment:
-
Re: Eeprom dump thread!
Anything guys?
Issue is that standby LED will flash 5 times. Power supply is good. I've tried another bios dumped from a similar board and the standby light stopped flashing, TV will turn on for few seconds and then turn off. So this is why I believe bios is corrupted. Any Help??...Last edited by shawnpsx323; 10-15-2022, 11:19 AM.
Leave a comment:
-
Re: Eeprom dump thread!
Good Day All,
Looking for dump for Samsung UN49M5300AFXZA Ver.FA01. Board number BN94-12049D.
Assistance in getting this as I believe the original is somehow corrupted.
Original dump attached incase it can be fixed.
Thanks......
Leave a comment:
-
Re: Bios for HP Prodesk 400 G2 Mini
Thanking you for this. Gotten a mini where the Unit would turn on with 5 white flashes and 1 red flash, not posting. The customer did his own programming and completely erased the bios. This file fixed it and we then updated from HP website. All is good now......
Leave a comment:
-
Re: HP 15-bs212wm LA-G121P ec bios needed
Ok guys. my apologies for not getting back sooner as i had put this on the back burner for the while.
I did both suggestions, I removed the offset, and I downloaded the .rar file.
I compared them both and they had minor differences.
So today I hooked up the TL866Plus using the ICSP (In Circuit Serial Programming) interface and wired it to the motherboard. I added a 3.3V VCC line as the programmer recommended and flashed the KB9022 controller with firstly the offset file. Disconnected the programmer and attached...
Leave a comment:
No activity results to display
Show More
Leave a comment: