hp450 g3 DA0X63MB6H1 REV H
Hello Everyone I have hp450 g3 DA0X63MB6H1 REV H, it does not power on, the power jack blinks white orange for 2 seconds then goes off. I have programmed with working bios bin files in the forum but the problem remains, I have just noticed it does not have 5v but i have 3v can someone help me with the boardview of this specific board or tell me the ic that is responsible for 5v. Thanks
-
Hello.
Have this ACER Spin 5 SP514-51N that have only 5V on usb-c charging ports and usb-c comtroller CYPD5225-96BZXI heats up. so i order new controller and replace it. now u have no reaction to charger. must be this ic programmed first and if yes than how... -
Hello.
Have this asus K56cn that came with strange lcd work. so i replace it, but when i connect battery i get burned SIO. After replace, no start. must this kbc IT8517E programmed or it program itself from bios? -
I upgraded display from HD to UHD recently, and I think I did everything right, battery was disabled in BIOS, and removed, yet the screen has no backlight. Both the old and new display behave the same way. I checked the motherboard and I see the fv1 fuse, and a fv2 spot for a fuse, but it's missing. Does anyone have any information on whether fv2 is responsible for backlight, or why it's missing? There's a schematic posted somewhere on this forum, but I can't view it as I don't have the hardware right now, since the laptop screen is broken and I run Linux.
Also from further search... -
I have question MEC1653-BA1 can be programmed with CH341APRO -
Anyone knows if ,these days,new KB9022QD must be programmed when replacing faulty SIO in Acer Aspire 3 (dh5jv la-g021p Rev:1) ?