I have question MEC1653-BA1 can be programmed with CH341APRO
-
-
Thread closed.
Read BIOS guides, methods, resources and tools​ thread before asking questions please.----------------------------------------------------------------------------------------------------------------------------------------------------------
All donations to Badcaps are welcome.
Become a Badcaps supporter
>>>>> click on this link to donate <<<<<
Thanks to all supporters.​
----------------------------------------------------------------------------------------------------------------------------------------------------------Doctrina est fructus dulcis, radicis amarae..
-
Please post any suggestions and corrections to the discussion thread: https://www.badcaps.net/forum/showthread.php?t=103527
For additional information on SPI ROM, BIOS, EC, Intel ME, etc., please read: https://github.com/ISpillMyDrink/UEFI-Repair-Guide/wiki
Table of Contents:
1. How to dump and flash
1.1. BIOS
1.1.1. Programmers
1.1.1.1. T48
1.1.1.2. T56
1.1.1.3. RT809F
1.1.1.4. RT809H
1.1.1.5. EZP2019
1.1.1.6. CH341A
1.1.2. Adapters
1.2. EC
1.2.1. Programmers
1.2.1.1. SVOD3
1.2.1.2.... -
Please post any suggestions and corrections about the BIOS guides, methods, resources and tools thread here.
TODO:- Add list of known suffixes for Dell
- Complete list of programmable/non-programmable EC
- Add more platforms with automatic EC flashing
- Add more brands for BIOS extraction
- Add EC firmware extraction process
- Probably a lot of other stuff I forgot
-
Please post any suggestions and corrections to the discussion thread: https://www.badcaps.net/forum/showthread.php?t=103527
For additional information on SPI ROM, BIOS, EC, Intel ME, etc., please read: https://github.com/ISpillMyDrink/UEFI-Repair-Guide/wiki
Table of Contents:
1. How to dump and flash
1.1. BIOS
1.1.1. Programmers
1.1.1.1. T48
1.1.1.2. T56
1.1.1.3. RT809F
1.1.1.4. RT809H
1.1.1.5. EZP2019
1.1.1.6. CH341A
1.1.2. Adapters
1.2. EC
1.2.1. Programmers
1.2.1.1. SVOD3
1.2.1.2.... -
Sublect line continuation: ... Jaguar IDS PC aka Panasonic
>Read BIOS guides, methods, resources and tools
>
Ack
>Try the method at BIOS guides, methods, resources and tools before requesting help
>
Ack
>Explain you were not able to succeed with the methods at BIOS guides, methods, resources and tools
>
python ./main.py "/mnt/c/temp/205605f9e1b60403a41787efeffe9cad-flas_maybe5.BIN" --output-dir "/mnt/c/temp/205605f9e1b60403a41787efeffe9cad-flas_maybe5.txt"
------------------------------------------------... -
This is a Predator PT516-51s laptop, serial number is rubbed off. Board is LA-L211P Rev 1A. Charging light is on, machine draws 2.8a lid closed. If I press the power button, I get a blue power light indicator about 5 seconds, then it goes back off. I pulled the board to discover that with battery and AC connected, battery mosfet 1 light up under thermal. I then verified a short to ground on battery mosfet 2 source. If I inject voltage there, my PSU goes to current limit, but nothing illuminates on the board - anywhere, either side. I removed mosfet 2 but still have the ground short at source....10-21-2025, 01:35 PM
Comment